Mitsubishi Electronics XD20A user manual Auto Source Settings, Using the Power Saving Function

Page 29

⇔ Reversed horizontally

Reversed vertically+horizontally

Auto Source Settings

Automatically Searching The Input Signal

1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “SETUP”.

2 Use the cursor / keys to select “AUTO SOURCE”, then use the cursor ◀ / ▶ keys to set ON or OFF.

ON: All input signals are searched.

OFF: Remote control VIDEO button:

Video and S-video are searched.

Remote control RGB button:

RGB and YCbCr signals are searched.

Main unit SOURCE button:

All input signals are searched individually.

Using the Power Saving Function

When there is no signal input for a period of 5 min. or more, the power is automatically turned off and standby status is activated.

1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ buttons to select “SETUP”.

2 When SETUP menu is displayed, use the cursor / keys to select “AUTO POWER OFF”.

3 Use the cursor ◀ / ▶ keys to set Power

Saving to ON or OFF.

Selecting a Projection Type

If the projection type is not correctly set in accordance with the installation conditions, images may be projected reversed, verti- cally, or horizontally.

1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “SETUP”.

2 When SETUP menu is displayed, use the cursor / keys to select “PROJEC- TION”, then press the ENTER button.

3 Use the cursor / keys to select a projection type in accordance with the set conditions.

The setting items will change as shown below each time a key is pressed.

Normal ⇔

⇔

Reversed vertically ⇔

To select other menu names

Press the MENU button. The cursor will disappear and the menu selection screen will be displayed.

To close the menu

Press the CANCEL button.

E – 29

Image 29

Contents Data Projector Important Safeguards PrecautionsInstallation Power SupplyB l e o f c o n t e n t s A t u r e s Power cable mains lead 1.8 m/5.9 ftE c k i n g t h e P p l i e d a c c e s s o r i e s RGB cable Audio cable 3.3 ftE p a r i n g t h e M o t e c o n t r o l Remote control effective rangeInserting the batteries Quick Start GuideBottom R t s a n d c o n t r o l sTop, front and side panel view Mouse connector Audio jack 10, 11, 12 RGB/YCbCr connector 11Rear and side panel view Built-in Security SlotMute button Enter button 17 Infrared transmitterAuto button Freeze button Installation Guidelines normal installation InstallationScreen height Screen sizeConnection to the Video jack of the unit N n e c t i n g v i d e o e q u i p m e n tRear panel jacks of this device Connection to the S-VIDEO jack of the unitConnection to the RGB/YCbCr connector N n e c t i n g a P C o r M a c i n t o s h Windows 98/Windows Changing the computer’s video resolutionsWindows MacintoshAdjust the position and height of the unit Connect the power cordI n g t h e u n i t Turn on the connected source computer, VCR, DVD player, etcCase of RGB input, adjust the video of the connected PC I n g t h e u n i t N t i n u e d After using the unitIBM PS/2 Mouse Port Connection Remote control mouse functionsUSB Port Connection Adjusting the Volume Automatic Screen AdjustmentKeystone Adjustment Freezing animated imagesEnlarging the picture To move to the desired portion of the enlarged pictureScreen Reduction Press the desired portion of the cursor keyCommon menu N u S t r u c t u r eNormal menu RGB input Advanced menu J u s t i n g t h e p i c t u r e e l e m e n t s Press the cursor / keys to adjust the sharpnessTo select other menu names To close the menuTiming Chart If no images appear during setting Adjusting Clock Frequency and PhaseAdjusting the position of the image Resetting the time the hours of lamp usage ResettingS e t t i n g S e t t i n g t h e L a m p H o u r s o f U s a g eAdjusting Color Balance Setting the Cinema ModeT t i n g N a r r o w I m a g e s a d v a n c e d M e n u Selecting the Color SystemSetting Filter Setting the RGB/YCbCr connectorSetting the Display Frame I t i a l S e t t i n g s Setting the partial display positionAudio Muting Selecting the BackgroundSelecting a Projection Type Auto Source SettingsUsing the Power Saving Function T t i n g t h e M e n u Troubleshooting Status Light Messages Status indicatorP l a c i n g t h e l a m p Lamp cartridge replacement procedureR t r i d g e StepSub Pin Assignments Specification sOptical Electrical230 mm/9.0″ DimensionsMm/7.0″ 177