Mitsubishi Electronics XD20A I t i a l S e t t i n g s, Setting the partial display position

Page 28

S e t t i n g i n A c c o r d a n c e W i t h I m a g e C o n t e n t s ( c o n t i n u e d )

Setting Keystone

This is used to set the height for keystone adjustment.

1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “VIEW”.

2 Display the frame, then use the cursor / keys to select “KEYSTONE”.

3 Use the cursor ◀ / ▶ keys to select “NOR-

MAL” or “FULL”.

●Normal: normal keystone correction

●Full: In this mode, the image is enlarged to fill the screen vertically and then Keystone correc- tion is performed.

Setting the partial display position

Input a signal that is rated SXGA to RGB/YCbCr connector and then set the partial display position with ASPECT (described later) set to Real.

1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “VIEW”.

2 Display the frame, use the cursor / keys to select “PAN” and then press the ENTER button.

3 Use the cursor / , ◀ / ▶ keys to set the display position.

I n i t i a l S e t t i n g s

Audio Muting

Audio only can be muted for each input.

This function is convenient when multiple video units are connected to this projector.

1 Select the input to be muted (page 16).

2 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “SETUP”.

3 Use the cursor / keys to select “SOUND MUTE”, then use the cursor ◀ /

▶keys to set muting to ON or OFF.

Selecting the Background

Two different backgrounds can be selected for projection when there is no signal input.

1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “SETUP”.

2 Use the cursor / keys to select “BACKGROUND”.

3 Use the cursor ◀ / ▶ keys to select one of the following backgrounds.

●Blue ● Black

Auto Gain

Brightness and contrast are adjusted automatically.

1 Select the input to be set for auto gain (page 16).

2 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “SETUP”.

3 Use the cursor / key to select “AUTO GAIN”, then use the cursor ◀ / ▶ keys to set ON or OFF.

To select other menu names

Press the MENU button. The cursor will disappear and the menu selection screen will be displayed.

To close the menu

Press the CANCEL button.

E – 28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Data Projector Precautions Important SafeguardsInstallation Power SupplyB l e o f c o n t e n t s Power cable mains lead 1.8 m/5.9 ft A t u r e sE c k i n g t h e P p l i e d a c c e s s o r i e s RGB cable Audio cable 3.3 ftRemote control effective range E p a r i n g t h e M o t e c o n t r o lInserting the batteries Quick Start GuideTop, front and side panel view R t s a n d c o n t r o l sBottom Audio jack 10, 11, 12 RGB/YCbCr connector 11 Mouse connectorRear and side panel view Built-in Security SlotAuto button Freeze button Enter button 17 Infrared transmitterMute button Installation Installation Guidelines normal installationScreen height Screen sizeN n e c t i n g v i d e o e q u i p m e n t Connection to the Video jack of the unitRear panel jacks of this device Connection to the S-VIDEO jack of the unitConnection to the RGB/YCbCr connector N n e c t i n g a P C o r M a c i n t o s h Changing the computer’s video resolutions Windows 98/WindowsWindows MacintoshConnect the power cord Adjust the position and height of the unitI n g t h e u n i t Turn on the connected source computer, VCR, DVD player, etcCase of RGB input, adjust the video of the connected PC After using the unit I n g t h e u n i t N t i n u e dUSB Port Connection Remote control mouse functionsIBM PS/2 Mouse Port Connection Automatic Screen Adjustment Adjusting the VolumeKeystone Adjustment Freezing animated imagesTo move to the desired portion of the enlarged picture Enlarging the pictureScreen Reduction Press the desired portion of the cursor keyN u S t r u c t u r e Common menuNormal menu RGB input Advanced menu Press the cursor / keys to adjust the sharpness J u s t i n g t h e p i c t u r e e l e m e n t sTo select other menu names To close the menuTiming Chart Adjusting the position of the image Adjusting Clock Frequency and PhaseIf no images appear during setting Resetting Resetting the time the hours of lamp usageS e t t i n g S e t t i n g t h e L a m p H o u r s o f U s a g eSetting the Cinema Mode Adjusting Color BalanceT t i n g N a r r o w I m a g e s a d v a n c e d M e n u Selecting the Color SystemSetting the Display Frame Setting the RGB/YCbCr connectorSetting Filter Setting the partial display position I t i a l S e t t i n g sAudio Muting Selecting the BackgroundUsing the Power Saving Function Auto Source SettingsSelecting a Projection Type T t i n g t h e M e n u Troubleshooting Status indicator Status Light MessagesLamp cartridge replacement procedure P l a c i n g t h e l a m pR t r i d g e StepSpecification s Sub Pin AssignmentsOptical ElectricalDimensions 230 mm/9.0″Mm/7.0″ 177
Top Page Image Contents