Mitsubishi Electronics XD460U user manual To use the Expand mode, To use the PinP mode

Page 29

Expand

By pressing the EXPAND button on the remote control, you can magnify the image to view the details.

•The EXPAND mode doesn't function with some input signals. For details, see page 38.

EXPAND

Magniﬁed image

To use the EXPAND mode:

1.Press the EXPAND button.

•You can select the area to be magniﬁed by pressing the , , , or button on the remote control.

•You can change the magniﬁcation of the selected area by pressing the + or - button.

2.Press the EXPAND button again to the exit the EX- PAND mode.

•The regular operation screen will appear.

Important:

• In the EXPAND mode, you can't adjust the volume.

Picture in Picture (PinP)

One of the special features of this projector is the picture-in-picture (PinP) mode. The PinP mode allows you to view the images from different sources at the same time.

To use the PinP mode

1. Press the PinP button on the remote control.

•When you press the PinP button with the image from the COMPUTER/COMPONENT VIDEO IN ter- minal displayed on the screen, the image from the VIDEO IN or S-VIDEO IN terminal is displayed as the sub image.

•When the image from the VIDEO IN or S-VIDEO IN terminal is displayed, the PinP mode isn't activated.

2.If necessary, select the desired external input source of the sub image by using the VIDEO or S-VIDEO button on the remote control or the VIDEO button on the control panel.

3.Press the PinP button on the remote control.

• The PinP mode will be canceled.

To change the position of the sub image:

Press the or buttons on the remote control.

Important:

•The motion may not run smoothly in the PinP mode.

•The PinP mode isn't available with some input signals. For further information, see page 38.

•When the COMPUTER 1 or COMPUTER 2 button on the remote control or the COMPUTER button on the control panel is pressed, the PinP mode will be canceled.

Still

To stop the motion in the image temporarily (or to dis- play a still image):

Press the STILL button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the STILL button on the remote control again.

Important:

•Do not display a still picture for a long time because the afterimages may persist on the screen.

ENGLISH

EN-29

Image 29

Contents XD490 XD460 Risk of Electric Shock Do not Open When using the projector in EuropeContents Important safeguards Do not look into the lens when it is operating Do not keep using the damaged projectorDo not unplug the power cord during op- eration Place of installationPreparing your projector Checking accessoriesInserting the batteries into the remote control Terminal board OverviewControl panel How to disable the Laser button Adjustment foot Front Lamp cover Adjustment feet RearHow to enable the Laser button Preparating your projector ContinueOperational range of the remote control Using the remote controlReception angle Front of projector Rear of projectorSetting up the screen Setting up your projectorBasic setup Adjusting the projection angleRear projection Wall screenFront projection, ceiling mounting When the aspect ratio of the screen is Setting up your projectorScreen size and projection distance Virtual lens shiftViewing computer images Connecting the projector to a computerViewing computer images Plugging the power cordProjecting images Example of the setting procedure for external output When connecting to a notebook computerTo stop projecting AV muteConnecting to a video player, etc Connecting the projector to video equipmentWhen a TV tuner or VCR is connected Viewing video imagesConnecting to video equipment having a DVI-D terminal Plugging in the power cordViewing video images Projector + DVD player or Hdtv decoderProjecting images Volume from the speaker How to change the settings Setting the aspect ratioWith the remote control With the Feature menuMenu operation How to set the menusInstallation menu Available settings in the menusMenu operation Feature menuSignal menu To adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To cancel the menuTo adjust the tone of white Color Temp Adjusting projected imagesAbout color temperature Color EnhancerLPF Progressive ﬁlter To adjust the vertical positionPassword function Advanced featuresTo enable the password function To cancel the password functionTo use the PinP mode To use the Expand modeExpand To change the position of the sub imageProjector + computer with USB connector Advanced featuresUSB PageUP buttonReplacing the lamp Interval of lamp replacementCleaning of the lens Cleaning of the projector and the ventilation slotsReset of the lamp operation time Replacing the lampNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly TroubleshootingProblem Solution Kensington Lock Others Problem SolutionNormal condition IndicatorsAbnormal condition Status ConditionSpeciﬁcations Replacement part Option / Not included in the boxDVI RCAXGA85 SpeciﬁcationsDimension Drawings unit mm ConnectorsMitsubishi Projector Contact Information