Mitsubishi Electronics XD460U Speciﬁcations, Replacement part Option / Not included in the box

Page 37

Speciﬁcations

The speciﬁcations and outside appearance of the projector are subject to change without prior notice.

						ENGLISH
Type			DLP™ projector			ENGLISH
Model			XD490U/XD460U
Display Technology			0.7-inch Single chip DMD
			Pixel 1024 x 768 = 786432 pixels
Projection lens			F 2.4 - 2.6 f= 23 - 27.6 mm
Light-source lamp			250 W
Image size (Projection distance)			40" min. to 300" max. (Projection distance 1.3 to 10 m)
Maximum number of display colors			16770000 (full-color display)
Maximum		Computer signal	Maximum resolution : 1280 x 1024 dots (Analog) / compressed
resolution			Panel resolution : 1024 x 768 dots
		Video signal	NTSC / PAL / SECAM / NTSC 4.43 / PAL-M / PAL-N / PAL-60
		Component	480i, 480p, 576i, 576p, 720p, 1080i
		signal	Panel resolution : 1024 x 768 dots
Computer input			[Signal type]	[Terminal type]	[Line]
			Analog RGB	D-SUB 15P	1
			Digital RGB	DVI	1
Video input			[Signal type]	[Terminal type]	[Line]
			Video input	RCA	1
			S-Video input	S	1
			Component video input	RCA	1
Audio input			[Signal type]	[Terminal type]	[Line]
			RGB	Stereo mini jack (ø3.5) 1
			Component	RCA (L, R)	1
			Video/S-video	RCA (L, R)	1
Speaker			2 W Mono Round type ø4.5cm x 1
Control terminal/Others			RS-232C (8-pin), USB terminal
Operating temperatures			+41°F (+5°C) to +95°F (+35°C)
Rated voltage			AC100 - 240V, 50/60Hz
Power consumption			3.5 A
Dimensions			310 mm (W) x 100 mm (H) x 245 mm (D)		* Not included protrusion.
Weight			2.9 kg
Others		S-video input	Luminance signal : Vp-p=1.0 V 75Ω (negative sync)
			Chrominance signals : Vp-p=0.286 V 75Ω (burst signal)
		Video input	Vp-p=1.0 V 75Ω (negative sync)
		Component video	YCBCR : Vp-p=1.0 V 75Ω (Y) (negative sync)
		input	Vp-p=0.7 V 75Ω (CB, CR)
		Analog input	RGB : Vp-p=0.7 V 75Ω (negative sync)
			YCBCR : Vp-p=1.0 V (Y)	(negative sync) Vp-p=0.7 V (CB, CR)
			HD/CS : TTL-level (negative or positive polarity)
			VD : TTL-level (negative or positive polarity)
		Digital input (DVI)	DVI-D interface (TMDS single link) with HDCP
		Audio input	200 mVrms, 10 kΩ or more
		DC OUT	5V 1.5A(max) (For wireless LAN unit)

Replacement part

(Option / Not included in the box)

Spare lamp

(VLT-XD400LP)

Wireless LAN unit

(WL20)

EN-37

Image 37

Contents XD490 XD460 Risk of Electric Shock Do not Open When using the projector in EuropeContents Important safeguards Do not look into the lens when it is operating Do not keep using the damaged projectorDo not unplug the power cord during op- eration Place of installationInserting the batteries into the remote control Checking accessoriesPreparing your projector Control panel OverviewTerminal board How to disable the Laser button Adjustment foot Front Lamp cover Adjustment feet RearHow to enable the Laser button Preparating your projector ContinueOperational range of the remote control Using the remote controlReception angle Front of projector Rear of projectorSetting up the screen Setting up your projectorBasic setup Adjusting the projection angleFront projection, ceiling mounting Wall screenRear projection When the aspect ratio of the screen is Setting up your projectorScreen size and projection distance Virtual lens shiftViewing computer images Connecting the projector to a computerViewing computer images Plugging the power cordProjecting images Example of the setting procedure for external output When connecting to a notebook computerTo stop projecting AV muteConnecting to a video player, etc Connecting the projector to video equipmentWhen a TV tuner or VCR is connected Viewing video imagesConnecting to video equipment having a DVI-D terminal Plugging in the power cordViewing video images Projector + DVD player or Hdtv decoderProjecting images Volume from the speaker How to change the settings Setting the aspect ratioWith the remote control With the Feature menuMenu operation How to set the menusInstallation menu Available settings in the menusSignal menu Feature menuMenu operation To adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To cancel the menuTo adjust the tone of white Color Temp Adjusting projected imagesAbout color temperature Color EnhancerLPF Progressive ﬁlter To adjust the vertical positionPassword function Advanced featuresTo enable the password function To cancel the password functionTo use the PinP mode To use the Expand modeExpand To change the position of the sub imageProjector + computer with USB connector Advanced featuresUSB PageUP buttonReplacing the lamp Interval of lamp replacementCleaning of the lens Cleaning of the projector and the ventilation slotsReset of the lamp operation time Replacing the lampNo image appears on the screen Problem Solution TroubleshootingProblem Solution TroubleshootingImages are not displayed correctly Kensington Lock Others Problem SolutionNormal condition IndicatorsAbnormal condition Status ConditionSpeciﬁcations Replacement part Option / Not included in the boxDVI RCAXGA85 SpeciﬁcationsDimension Drawings unit mm ConnectorsMitsubishi Projector Contact Information