Basic operation
4
6
3, 1, 2
3, 1, 2 |
| COMPUTER | 5 | |
| 1 | 2 | ||
| 1 | 2 | ||
KEYSTONE |
| VIDEO |
| |
| EXPAND | P in P | AUTO POSITION |
|
| VOLUME |
| LASER |
|
POWER | STATUS | MENU | ENTER | |
|
| MUTE | STILL | 16 : 9 |
|
|
|
| MEMORY |
|
|
| SELECT |
|
DVD VIDEO
55
Power-on
1.Turn on the device connected to the projector first.
2.Plug the power cord in the wall outlet.
•The POWER indicator lights up.
•If the power cord is unplugged from the wall outlet before the projector is cooled down com- pletely after use, the fans may start rotating when the power cord is plugged in next time and the POWER button may not function. In this case, wait for the fans to stop and press the POWER button to light the indicator.
3.Press the POWER button.
•It may take about one minute for the lamp to light up.
•The lamp occasionally fails to light up. Wait a few minutes and try to light the lamp again.
•After the POWER button is pressed, the image may flicker before the lamp becomes stable. This is not a product malfunction.
•LAMP MODE can't switch for one minute after the power ON. (For XD480U / XD450U only)
Indicator | STATUS | POWER |
Condition |
|
|
- | Red | |
When the lamp is on. | Green | Green |
Important:
•Do not cover the lens with the lens cap while the lamp is on. Do not strip off the aluminum sheet in- side the lens cap.
•The projector starts warming up when the POWER button is pressed. During the
•By blinking red, the STATUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the STATUS indicator blinks red. (See page 27 and 30.)
•Images may not be projected with good quality in an extremely hot or cold environment. (This is not a product malfunction.)
4.Adjust the focus by turning the focus ring.
5.Choose your desired external input source using the COMPUTER or VIDEO button.
•The input source is switched between COMPUT- ER 2 and DVI at every press of the COMPUTER 2 button on the remote control. (For XD480U / XD450U only)
•The input source is switched between COM- PUTER 1, COMPUTER 2 and DVI (For XD480U / XD450U only) at every press of the COMPUTER button on the control panel.
•The input source is switched between VIDEO and
•The projector automatically selects the appropri- ate signal format. The selected signal format is displayed on the screen.
•The COMPUTER and VIDEO buttons don't func- tion while the menu is being displayed.
•When COMPUTER 1 or COMPUTER 2 is chosen
as the source, images supplied from the compu- ter may flicker. Press the or button on the remote control to reduce flicker, if it occurs.
•To avoid permanently imprinting a fixed image onto your projector, please do not display the same stationary images for long period.
6.Adjust the image size by turning the zoom ring.
• If necessary, adjust the focus and zoom again.
EN - 14