Mitsubishi Electronics XD480U Advanced features, Expand, Picture in Picture PinP, Still

Page 21

Advanced features

Expand

By pressing the EXPAND button on the remote control, you can magnify the image to view the details. You can view the image in its original size in the REAL mode.

•The EXPAND mode doesn't work with video or S-video signal.

•The EXPAND mode doesn't function with some in- put signals. For details, see page 33.

EXPAND REAL

Magnified im-

Native resolution

age

display

To choose the EXPAND or REAL mode:

1.Press the MENU button.

2.Press the ￿ or ￿ to select the FEATURE menu.

3.Press the ENTER button.

4.Press the ￿ or ￿ button to select EXPAND MODE.

5.Press the ￿ or ￿ to choose EXPAND or REAL.

6.Press the MENU button twice to exit the menu.

To use the EXPAND mode:

1.Press the EXPAND button.

•You can select the area to be magnified by press- ing the ￿, ￿, ￿, or ￿ button on the remote control.

•You can change the magnification of the selected area by pressing the + or - button.

2.Press the EXPAND button again to the exit the EX- PAND mode.

•The regular operation screen will appear.

Important:

• In the EXPAND mode, you can't adjust the volume.

To use the REAL mode:

1. Press the EXPAND button.

•In the REAL mode, press the ￿ or ￿ button on the remote control for fine adjustment.

•In the REAL mode, the AUTO POSITION button doesn't function. When this button is pressed, the prohibition mark () appears on the screen.

2.Press the EXPAND button again to the exit the REAL mode.

• The regular operation screen will appear.

Picture in Picture (PinP)

One of the special features of this projector is the

ENGLISH

picture-in-picture (PinP) mode. The PinP mode allows

 

you to view the images from different sources at the

 

same time.

 

To use the PinP mode

1. Press the PinP button on the remote control.

•When you press the PinP button with the image from the COMPUTER/COMPONENT VIDEO IN terminal displayed on the screen, the image from the VIDEO IN or S-VIDEO IN terminal is displayed as the sub image.

•When the image from the VIDEO IN or S-VIDEO IN terminal is displayed, the PinP mode isn't activated.

2.If necessary, select the desired external input source of the sub image by using the VIDEO 1 or VIDEO 2 button on the remote control or the VIDEO button on the control panel.

3.Press the PinP button on the remote control.

• The PinP mode will be canceled.

To change the position of the sub image:

Press the ￿ or ￿ buttons on the remote control.

Important:

•The motion may not run smoothly in the PinP mode.

•The PinP mode isn't available with some input signals. For further information, see page 33.

•When the COMPUTER 1 or COMPUTER 2 button on the remote control or the COMPUTER button on the control panel is pressed, the PinP mode will be canceled.

Still

To stop the motion in the image temporarily (or to dis- play a still image):

Press the STILL button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the STILL button on the remote control again.

Important:

•Do not display a still picture for a long time because the afterimages may persist on the screen.

EN - 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents XD480 XD450 XD400 Risk of Electric Shock Do not Open When using the projector in EuropeContents Important safeguards Do not look into the lens when the projector is oper- ating Do not keep using the damaged projectorPlace of installation Never remove the cabinet Do not modify the projectorOverview Control panelTerminal board Adjustment foot Front Lamp cover Adjustment feet Rear Bottom side Remote controlHow to disable the Laser button How to enable the Laser buttonBattery installation Remote controlOperation range of the remote control Reception angle verticalLayout of the projector InstallationRear projection Front projectionProjector + AV device Basic connectionsProjector + DVD player or Hdtv decoder VCR, etcCOMPUTER/COMPONENT Video DVI-D Hdcp IN-2 Projector + Computer Basic connectionsFor Macintosh About DDCAfter using the projector Adjustment of the projection anglePreparation Preparation for projectionBasic operation Power-onVolume from the speaker Power-offAnamorphic mode Auto Position buttonBasic operation Menu operationOff. Use the remote control to turn on the lamp Projector is in the stand-by mode when the lamp isStand-by mode when there is no signal input from SourceMenu operation Signal User No need to adjust in normal useImage adjustment Image adjustmentColor temperature About color temperatureImage adjustment Adjustment of the image from the computerSimple adjustment method Expand Advanced featuresPicture in Picture PinP StillSetting of the image displayed during startup or muting Advanced featuresInstallation other devices remote commands How to installHow to use the installed functions Projector + computer with USB connector Mouse remote controlOperation USBTo cancel the password function Password functionTo enable the password function FunctionInterval of lamp replacement Lamp replacementTroubleshooting Problem Cause and solutionImages arent projected on the screen Images arent projected correctly TroubleshootingCleaning of the projector and the ventilation slots Cleaning of the lensOthers Condition IndicatorsKensington Lock SpecificationsCD-ROM SpecificationsCGA70 Mitsubishi Electric Corporation
Top Page Image Contents