Bottom side Remote control | Mitsubishi Electronics XD480U specification

JANUARY 2003

MADE IN CHINA

RADIAÇÃO LASER

EVITAR A EXPOSIÇÃO AO FEIXE APARELHO LASER DA CLASSE 2 POTÊNCIA MÁXIMA: 1mW COMPRIMENTO DE ONDA: 640 - 660 nm

MANUFACTURER : B MANUFACTURED

Bottom side

Remote control

4		COMPUTER
4		1	2
5	KEYSTONE		VIDEO
5		1	2
6	EXPAND	P in P	AUTO POSITION
6	VOLUME
7	VOLUME		LASER
7
8
9
10	MENU	R-CLICK	ENTER
10
11	MUTE	STILL	16 : 9
11

MEMORY

SELECT

DVD VIDEO

1Adjustment foot (Front)

2Lamp cover

3Adjustment feet (Rear)

Caution:

Do not replace the lamp immediately after using the pro- jector because the lamp would be extremely hot and it may cause burns.

1Laser aperture

2Transmission window

3Indicator

4POWER button

5KEYSTONE button

6EXPAND button

7+ , - (VOLUME) buttons

8Mouse pointer

9MENU button

10STILL button

11MUTE button (Audio/Video)

12Programmable buttons

13SELECT switch

14MEMORY button

1516 : 9 button

16ENTER button

17R-CLICK button (For mouse)

18Direction buttons

19LASER button

20AUTO POSITION button

21PinP button

22VIDEO 1, 2 button

23COMPUTER 1, 2 button

24Left click button (For mouse)

•The + and - buttons are used in the KEYSTONE adjustment and the EXPAND mode in addition to the volume control.

•Pressing the LASER button emits a laser beam. Even when you keep holding down the LASER button, it is emitted only one minute. To keep emitting it longer, press the LASER button again.

•You can disable the LASER button to prevent laser radiation due to misuse of the button.

How to disable the LASER button

While holding the LASER button down, press the button three times.

How to enable the LASER button

While holding the LASER button down, press the button three times.

ENGLISH

AVOID EXPOSURE-LASER R A D I A T I O N I S E M I T T E D FROM THIS APERTURE

C A U T I O N

LASER RADIATION

DO NOT STARE INTO BEAM


WAVE LENGTH			: 640-660nm
MAX OUTPUT			:	1mW
CLASS	2	LASER		PRODUCT
Comp l ies w i t h	21	CFR, 1040. 10 and 1040. 11

RAYONNEMENT LASER

NE PAS REGARDER DANS LE FAISCEAU APPAREIL A LASER DE CLASSE2 LASER-STRAHLUNG

NICHT IN DEN STRAHL BLICKEN LASER KLASSE 2 RADIAZIONl LASER

NON GUARDARE NEL RAGGIO LUCE

APPARECCHIO LASER DI CLASSE 2

WAVE LENGTH :640-660nm MAX OUTPUT:1mW IEC60825-1:1993+A1:1997+A2:2001

INTERLINK K.K.

SHINODA BLDG 1-10-7 HIGASHIKANDA CHIYODA-KU,TOKYO 101-0031,JAPAN

About the laser beam

This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength : 640-660 nm)

Beam Divergence : 6m distance about 10.0mm x 10.0mm (±6.0mm)

CAUTION :

•Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.

•Use of controls or adjustments or procedures other than those speciﬁed herein may result in hazardous radiation exposure.

•This remote controller cannot be repaired.

EN - 7