Mitsubishi Electronics XD480U Menu operation, Signal User No need to adjust in normal use

HORIZ. POSITION VERT. POSITION FINE SYNC. TRACKING

COMPUTER INPUT

HOLD

USER

SIGNAL-USER

Menu operation (continued)

3 FEATURE
				opt.	XGA60
MENU POSITION .... Use to select the position of the menu on the screen, 1.
(upper left) or 2. (lower right).	FEATURE
EXPAND MODE.... Choose the mode for enlarging the image. See page 21.			MENU POSITION		1.
CINEMA MODE .... When AUTO is selected, the film mode will be automatically
		A	EXPAND MODE		EXPAND
		A
activated when a film source signal is inputted. When OFF is			CINEMA MODE		AUTO
selected, the film mode will not be activated.
	?		VIDEO SIGNAL		AUTO
VIDEO SIGNAL..... When AUTO is selected, the appropriate video format is
			SCART INPUT		OFF
automatically selected depending on the input signal. If
			ANAMORPHIC		OFF
the image isn't displayed correctly, select the desired video
			PASSWORD		DISPLAY
format manually.			FUNCTION		INPUT
		A Ë	LANGUAGE		English
SCART INPUT ...... Choose ON when connecting the projector with a device
			RESET ALL		OK
equipped with the SCART terminal that can output RGB

signal. SCART terminal is used mainly in Europe. Choose

OFF normally. (Available only for the input signal from the COMPUTER?COMPONENT VIDEO IN-1 terminal.)

ANAMORPHIC ..... Select the desired position from among UPPER, CENTER, and LOWER when playing DVD discs

containing data of letterboxed images.

PASSWORD FUNCTION.. Use to change the mode of the password lock or to enable or cancel the password lock. See

page 25 for details.			/ English / Español / Deutsch / Français /
LANGUAGE.......... Use to select the language used in the menu. (
Italiano / /	/	/ PORTUGUÊS).

RESET ALL........... Use to reset the menu settings (except IMAGE CAPTURE, PASSWORD, and LANGUAGE ).

•CINEMA MODE can be adjusted only when a TV60,480i signal is being displayed.

•SCART INPUT is available only when the input signal is from COMPUTER / COMPONENT VIDEO IN 1 terminal.

•When SCART INPUT is set to ON, nothing is output to the external monitor.

•When SCART INPUT is set to ON, normal computer signals aren't projected.

•Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren't compatible with this projector.

•When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depending on the input signal in such cases.

•When ANAMORPHIC is set to except OFF, the keystone adjustment ranges are limited.

4 SIGNAL

HORIZ. POSITION ....	Use to adjust the horizontal position of the image.
VERT. POSITION	Use to adjust the vertical position of the image.
FINE SYNC	Use to synchronize the projector with the PC input signal so
	that the image is not blurred.
TRACKING	Use to eliminate image noise such as wide stripes.
COMPUTER INPUT	The projector adjusts its settings automatically when
	connected to a DVD player equipped with a component
	video output (Y, CB, CR). When the projector is connected
	with a device having an RGB terminal, choose RGB
	manually.
HOLD	Use to adjust the image when flagging occurs near the top
	of the screen.

SIGNAL

R G B

R G B

opt.

XGA60

0

0

0

0

RGB

ON

OK

5 SIGNAL - USER (No need to adjust in normal use.)

CLAMP POSITION/			CLAMP	0
			POSITION
CLAMP WIDTH..... Use to correct solid white or solid black in the projected image.			CLAMP WIDTH	1
VERT.SYNC. ......... Use to adjust the image when its motion doesn't run smoothly.	?	VERT. SYNC.		AUTO
Select AUTO for normal use.
			SHUTTER (U)	0
SHUTTER (U)........ Use to adjust the image when noise appears on the top part of
			SHUTTER (L)	0
the image.
			SHUTTER (LS)	0
SHUTTER (L) ........ Use to adjust the image when noise appears on the bottom part
			SHUTTER (RS)	0
of the image.

SHUTTER (LS)...... Use to adjust the image when noise appears on the left half of the image.

SHUTTER (RS) ..... Use to adjust the image when noise appears on the right half of the image.

•If any setting of the SIGNAL-USER menu is changed, the image maynot be displayed cor- rectly. In this case, press the AUTO POSITION button.

Important:

• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.

EN - 18