Mitsubishi Electronics XD480U user manual Risk of Electric Shock Do not Open

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the pres- ence of important operating and maintenance (servicing) instructions in the literature accom- panying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEP- TACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

WARNING

Use the attached specified power supply cord. If you use another power supply cord, it may cause interfer- ence with radio and television reception.

Use the attached RGB cable or RS-232C cable with this equipment so as to keep interference within the limit of an FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defined in the Stan- dard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

When using the projector in Europe:

COMPLIANCE NOTICE

This Projector complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC "Low Voltage Directive" as amended by Directive 93/68/ EEC.

The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small- scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.

WARNING

Use the attached RGB cable or RS-232C cable with this equipment so as to keep interference within the limits of an EN55022 Class B device.

Please follow WARNING instructions.

EN - 2

Image 2
Contents XD480 XD450 XD400 When using the projector in Europe Risk of Electric Shock Do not OpenContents Important safeguards Place of installation Do not keep using the damaged projectorDo not look into the lens when the projector is oper- ating Never remove the cabinet Do not modify the projectorTerminal board OverviewControl panel How to disable the Laser button Bottom side Remote controlAdjustment foot Front Lamp cover Adjustment feet Rear How to enable the Laser buttonOperation range of the remote control Remote controlBattery installation Reception angle verticalRear projection InstallationLayout of the projector Front projectionProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device VCR, etcCOMPUTER/COMPONENT Video DVI-D Hdcp IN-2 For Macintosh Basic connectionsProjector + Computer About DDCPreparation Adjustment of the projection angleAfter using the projector Preparation for projectionPower-on Basic operationAnamorphic mode Power-offVolume from the speaker Auto Position buttonMenu operation Basic operationStand-by mode when there is no signal input from Projector is in the stand-by mode when the lamp isOff. Use the remote control to turn on the lamp SourceSignal User No need to adjust in normal use Menu operationColor temperature Image adjustmentImage adjustment About color temperatureSimple adjustment method Image adjustmentAdjustment of the image from the computer Picture in Picture PinP Advanced featuresExpand StillAdvanced features Setting of the image displayed during startup or mutingHow to use the installed functions Installation other devices remote commandsHow to install Operation Mouse remote controlProjector + computer with USB connector USBTo enable the password function Password functionTo cancel the password function FunctionLamp replacement Interval of lamp replacementImages arent projected on the screen TroubleshootingProblem Cause and solution Troubleshooting Images arent projected correctlyOthers Cleaning of the projector and the ventilation slotsCleaning of the lens Indicators ConditionSpecifications Kensington LockSpecifications CD-ROMCGA70 Mitsubishi Electric Corporation