Mitsubishi Electronics XD450U user manual Basic operation, Power-on

Page 14

Basic operation

4

6

3, ,

3,

,

 

COMPUTER

5

 

1

2

KEYSTONE

1

VIDEO 2

 

 

EXPAND

P in P

AUTO POSITION

 

 

 

VOLUME

 

LASER

 

POWER

STATUS

MENU

R-CLICK

ENTER

 

 

MUTE

STILL

16 : 9

MEMORY

SELECT

DVD VIDEO

5

5

Power-on

1.Turn on the device connected to the projector first.

2.Plug the power cord in the wall outlet.

•The POWER indicator lights up.

•If the power cord is unplugged from the wall outlet before the projector is cooled down com- pletely after use, the fans may start rotating when the power cord is plugged in next time and the POWER button may not function. In this case, wait for the fans to stop and press the POWER button to light the indicator.

3.Press the POWER button.

•It may take about one minute for the lamp to light up.

•The lamp occasionally fails to light up. Wait a few minutes and try to light the lamp again.

•After the POWER button is pressed, the image may flicker before the lamp becomes stable. This is not a product malfunction.

•LAMP MODE can't switch for one minute after the power ON. (For XD450U only)

Condition

Indicator

STATUS

POWER

 

 

 

 

Stand-by

-

Red

When the lamp is on.

Green

Green

Important:

•Do not cover the lens with the lens cap while the lamp is on. Do not strip off the aluminum sheet in- side the lens cap.

•The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are ac- cepted.

•By blinking red, the STATUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the STATUS indicator blinks red. (See page 27 and 30.)

•Images may not be projected with good quality in an extremely hot or cold environment. (This is not a product malfunction.)

4.Adjust the focus by turning the focus ring.

5.Choose your desired external input source using the COMPUTER or VIDEO button.

•The input source is switched between COMPUT- ER 2 and DVI at every press of the COMPUTER 2 button on the remote control. (For XD450U only)

•The input source is switched between COMPUT- ER 1, COMPUTER 2 and DVI (for XD450U only) at every press of the COMPUTER button on the control panel.

•The input source is switched between VIDEO and S-VIDEO at every press of the VIDEO button on the control panel.

•The projector automatically selects the appropri- ate signal format. The selected signal format is displayed on the screen.

•The COMPUTER and VIDEO buttons don't func- tion while the menu is being displayed.

•When COMPUTER 1 or COMPUTER 2 is chosen as the source, images supplied from the compu- ter may flicker. Press the or button on the remote control to reduce flicker, if it occurs.

•To avoid permanently imprinting a fixed image onto your projector, please do not display the same stationary images for long period.

6.Adjust the image size by turning the zoom ring.

• If necessary, adjust the focus and zoom again.

EN - 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents XD450 XD400 When using the projector in Europe Risk of Electric Shock Do not OpenContents Important safeguards Place of installation Do not keep using the damaged projectorDo not look into the lens when the projector is oper- ating Never remove the cabinet Do not modify the projectorTerminal board OverviewControl panel How to disable the Laser button Bottom side Remote controlAdjustment foot Front Lamp cover Adjustment feet Rear How to enable the Laser buttonOperation range of the remote control Remote controlBattery installation Reception angle verticalRear projection InstallationLayout of the projector Front projectionProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device VCR, etcCOMPUTER/COMPONENT Video DVI-D Hdcp IN-2 For Macintosh Basic connectionsProjector + Computer About DDCPreparation Adjustment of the projection angleAfter using the projector Preparation for projectionPower-on Basic operationAnamorphic mode Power-offVolume from the speaker Auto Position buttonMenu operation Basic operationStand-by mode when there is no signal input from Projector is in the stand-by mode when the lamp isOff. Use the remote control to turn on the lamp SourceSignal User No need to adjust in normal use Menu operationColor temperature Image adjustmentImage adjustment About color temperatureSimple adjustment method Image adjustmentAdjustment of the image from the computer Picture in Picture PinP Advanced featuresExpand StillAdvanced features Setting of the image displayed during startup or mutingHow to use the installed functions Installation other devices remote commandsHow to install Operation Mouse remote controlProjector + computer with USB connector USBTo cancel the password function Password functionTo enable the password function FunctionLamp replacement Interval of lamp replacementImages arent projected on the screen TroubleshootingProblem Cause and solution Troubleshooting Images arent projected correctlyOthers Cleaning of the projector and the ventilation slotsCleaning of the lens Indicators ConditionSpecifications Kensington LockSpecifications CD-ROMCGA70 Mitsubishi Electric Corporation

XD450U specifications

The Mitsubishi Electronics XD450U projector is a sophisticated device designed to enhance the presentation experience in both education and professional environments. Renowned for its reliability and performance, the XD450U combines a host of advanced features and technologies, making it a valuable tool for educators, corporate trainers, and business professionals.

One of the standout characteristics of the XD450U is its impressive brightness output. With a brightness rating of 4500 ANSI lumens, this projector is capable of delivering sharp and vibrant images even in well-lit rooms. This feature ensures that presentations remain clear, engaging, and easily visible to all audience members.

Resolution is another key aspect of the XD450U's design. The projector boasts a native XGA resolution of 1024 x 768 pixels, allowing it to produce detailed images and text. This resolution is particularly suitable for displaying presentations, documents, and other visual content with precision, ensuring that every detail is captured and effectively conveyed.

The XD450U incorporates advanced DLP (Digital Light Processing) technology, which contributes to its high-quality image production. DLP technology enhances color accuracy and provides smooth video playback, making it an excellent choice for multimedia presentations that include video content. Additionally, the projector offers a dynamic contrast ratio that improves the depth of images, enhancing the viewing experience overall.

Connectivity options are abundant with the XD450U, featuring multiple inputs such as HDMI, VGA, and composite video ports. This flexibility allows users to easily connect a variety of devices, including laptops, DVD players, and document cameras, facilitating seamless presentations. An adaptable design ensures that the projector can be integrated into numerous setups without difficulty.

The XD450U is also designed with user convenience in mind. It features a lightweight and compact design, making it easy to transport and set up in different locations. The projector has an intuitive interface and remote control, allowing for quick adjustments and easy operation during presentations.

In terms of maintenance, the XD450U is equipped with a long-life lamp that can last up to 5,000 hours in standard mode, reducing the frequency of lamp replacements and associated downtime. This enhances the overall cost-efficiency of ownership, making it a practical choice for frequent users.

In summary, the Mitsubishi Electronics XD450U projector combines high brightness, excellent resolution, advanced DLP technology, and versatile connectivity features to provide an exceptional presentation tool. Its user-friendly design and low maintenance requirements further enhance its appeal, making it an ideal choice for various professional and educational settings.
Top Page Image Contents