Mitsubishi Electronics XD450U Menu operation, Signal User No need to adjust in normal use

Page 18
HORIZ. POSITION VERT. POSITION FINE SYNC.
TRACKING
COMPUTER INPUT
HOLD
USER

Menu operation (continued)

3 FEATURE

 

 

 

 

 

 

 

 

opt.

XGA60

MENU POSITION .... Use to select the position of the menu on the screen, 1.

 

 

 

 

FEATURE

 

(upper left) or 2. (lower right).

 

EXPAND MODE.... Choose the mode for enlarging the image. See page 21.

 

 

 

MENU POSITION

1.

 

 

 

 

 

CINEMA MODE .... When AUTO is selected, the film mode will be automatically

 

 

 

 

 

 

A

EXPAND MODE

EXPAND

 

 

A

activated when a film source signal is inputted. When OFF is

 

 

 

CINEMA MODE

AUTO

selected, the film mode will not be activated.

?

 

VIDEO SIGNAL

AUTO

VIDEO SIGNAL..... When AUTO is selected, the appropriate video format is

 

 

 

SCART INPUT

OFF

 

 

 

automatically selected depending on the input signal. If

 

 

 

ANAMORPHIC

OFF

the image isn't displayed correctly, select the desired video

 

 

 

 

 

 

PASSWORD

DISPLAY

format manually.

 

 

 

FUNCTION

INPUT

 

A Ë

LANGUAGE

English

SCART INPUT ...... Choose ON when connecting the projector with a device

 

 

 

 

RESET ALL

OK

equipped with the SCART terminal that can output RGB

 

 

 

 

 

 

 

 

 

 

 

 

 

signal. SCART terminal is used mainly in Europe. Choose

 

 

 

 

 

OFF normally. (Available only for the input signal from the COMPUTER?COMPONENT VIDEO

IN-1 terminal.)

ANAMORPHIC ..... Select the desired position from among UPPER, CENTER, and LOWER when playing DVD discs

containing data of letterboxed images.

PASSWORD FUNCTION.. Use to change the mode of the password lock or to enable or cancel the password lock. See

page 25 for details.

 

 

 

LANGUAGE.......... Use to select the language used in the menu. (

/ English / Español / Deutsch / Français /

Italiano / /

/

/ PORTUGUÊS).

 

RESET ALL........... Use to reset the menu settings (except IMAGE CAPTURE, PASSWORD, and LANGUAGE ).

•CINEMA MODE can be adjusted only when a TV60,480i signal is being displayed.

•SCART INPUT is available only when the input signal is from COMPUTER / COMPONENT VIDEO IN 1 terminal.

•When SCART INPUT is set to ON, nothing is output to the external monitor.

•When SCART INPUT is set to ON, normal computer signals aren't projected.

•Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren't compatible with this projector.

•When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depending on the input signal in such cases.

•When ANAMORPHIC is set to except OFF, the keystone adjustment ranges are limited.

4 SIGNAL

HORIZ. POSITION ....

Use to adjust the horizontal position of the image.

VERT. POSITION

Use to adjust the vertical position of the image.

FINE SYNC

Use to synchronize the projector with the PC input signal so

 

that the image is not blurred.

TRACKING

Use to eliminate image noise such as wide stripes.

COMPUTER INPUT

The projector adjusts its settings automatically when

 

connected to a DVD player equipped with a component

 

video output (Y, CB, CR). When the projector is connected

 

with a device having an RGB terminal, choose RGB

 

manually.

HOLD

Use to adjust the image when flagging occurs near the top

 

of the screen.

SIGNAL

R G B

R G B

opt.

XGA60

0

0

0

0

RGB

ON

OK

5 SIGNAL - USER (No need to adjust in normal use.)

SIGNAL-USER

 

 

 

 

CLAMP

0

CLAMP POSITION/

 

 

 

POSITION

 

 

 

 

 

 

 

 

 

 

 

 

CLAMP WIDTH..... Use to correct solid white or solid black in the projected image.

 

 

 

CLAMP WIDTH

1

 

 

 

 

 

 

 

 

VERT.SYNC. ......... Use to adjust the image when its motion doesn't run smoothly.

 

 

? VERT. SYNC.

AUTO

 

 

 

 

 

Select AUTO for normal use.

 

 

 

SHUTTER (U)

0

SHUTTER (U)........ Use to adjust the image when noise appears on the top part of

 

 

 

SHUTTER (L)

0

the image.

 

 

 

SHUTTER (LS)

0

SHUTTER (L) ........ Use to adjust the image when noise appears on the bottom part

 

 

 

SHUTTER (RS)

0

of the image.

 

 

 

 

 

 

 

 

 

 

SHUTTER (LS)...... Use to adjust the image when noise appears on the left half of the image.

SHUTTER (RS) ..... Use to adjust the image when noise appears on the right half of the image.

•If any setting of the SIGNAL-USER menu is changed, the image maynot be displayed cor- rectly. In this case, press the AUTO POSITION button.

Important:

• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.

EN - 18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents XD450 XD400 When using the projector in Europe Risk of Electric Shock Do not OpenContents Important safeguards Place of installation Do not keep using the damaged projectorDo not look into the lens when the projector is oper- ating Never remove the cabinet Do not modify the projectorOverview Control panelTerminal board How to disable the Laser button Bottom side Remote controlAdjustment foot Front Lamp cover Adjustment feet Rear How to enable the Laser buttonOperation range of the remote control Remote controlBattery installation Reception angle verticalRear projection InstallationLayout of the projector Front projectionProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device VCR, etcCOMPUTER/COMPONENT Video DVI-D Hdcp IN-2 For Macintosh Basic connectionsProjector + Computer About DDCPreparation Adjustment of the projection angleAfter using the projector Preparation for projectionPower-on Basic operationAnamorphic mode Power-offVolume from the speaker Auto Position buttonMenu operation Basic operationStand-by mode when there is no signal input from Projector is in the stand-by mode when the lamp isOff. Use the remote control to turn on the lamp SourceSignal User No need to adjust in normal use Menu operationColor temperature Image adjustmentImage adjustment About color temperatureImage adjustment Adjustment of the image from the computerSimple adjustment method Picture in Picture PinP Advanced featuresExpand StillAdvanced features Setting of the image displayed during startup or mutingInstallation other devices remote commands How to installHow to use the installed functions Operation Mouse remote controlProjector + computer with USB connector USBTo cancel the password function Password functionTo enable the password function FunctionLamp replacement Interval of lamp replacementTroubleshooting Problem Cause and solutionImages arent projected on the screen Troubleshooting Images arent projected correctlyCleaning of the projector and the ventilation slots Cleaning of the lensOthers Indicators ConditionSpecifications Kensington LockSpecifications CD-ROMCGA70 Mitsubishi Electric Corporation

XD450U specifications

The Mitsubishi Electronics XD450U projector is a sophisticated device designed to enhance the presentation experience in both education and professional environments. Renowned for its reliability and performance, the XD450U combines a host of advanced features and technologies, making it a valuable tool for educators, corporate trainers, and business professionals.

One of the standout characteristics of the XD450U is its impressive brightness output. With a brightness rating of 4500 ANSI lumens, this projector is capable of delivering sharp and vibrant images even in well-lit rooms. This feature ensures that presentations remain clear, engaging, and easily visible to all audience members.

Resolution is another key aspect of the XD450U's design. The projector boasts a native XGA resolution of 1024 x 768 pixels, allowing it to produce detailed images and text. This resolution is particularly suitable for displaying presentations, documents, and other visual content with precision, ensuring that every detail is captured and effectively conveyed.

The XD450U incorporates advanced DLP (Digital Light Processing) technology, which contributes to its high-quality image production. DLP technology enhances color accuracy and provides smooth video playback, making it an excellent choice for multimedia presentations that include video content. Additionally, the projector offers a dynamic contrast ratio that improves the depth of images, enhancing the viewing experience overall.

Connectivity options are abundant with the XD450U, featuring multiple inputs such as HDMI, VGA, and composite video ports. This flexibility allows users to easily connect a variety of devices, including laptops, DVD players, and document cameras, facilitating seamless presentations. An adaptable design ensures that the projector can be integrated into numerous setups without difficulty.

The XD450U is also designed with user convenience in mind. It features a lightweight and compact design, making it easy to transport and set up in different locations. The projector has an intuitive interface and remote control, allowing for quick adjustments and easy operation during presentations.

In terms of maintenance, the XD450U is equipped with a long-life lamp that can last up to 5,000 hours in standard mode, reducing the frequency of lamp replacements and associated downtime. This enhances the overall cost-efficiency of ownership, making it a practical choice for frequent users.

In summary, the Mitsubishi Electronics XD450U projector combines high brightness, excellent resolution, advanced DLP technology, and versatile connectivity features to provide an exceptional presentation tool. Its user-friendly design and low maintenance requirements further enhance its appeal, making it an ideal choice for various professional and educational settings.
Top Page Image Contents