Mitsubishi Electronics XD450U user manual Never remove the cabinet Do not modify the projector

Page 5

WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector. It may cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inad- vertent contact may result in an electric shock. Except as specifically explained in User Manual, do not attempt to service this product by yourself. Please contact your dealer when you want to fix, adjust, or inspect the pro- jector.

Do not modify the projector.

It can lead to fire or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged, unplug the projector and contact your dealer for inspec- tion. It may lead to fire if you keep using the damaged projector.

Do not face the projection lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface.

Place the projector on a level and stable surface only.

Do not look into the lens when the projector is oper- ating.

It may hurt your eyes. Never let children look into the lens when the projector is on.

Do not unplug the power cord during operation. It can lead to lamp breakage, fire, electric shock or other trouble. Wait for the fan to stop before unplugging the power cord.

Do not touch the air outlet grilles and bottom plate. Do not touch them or put other equipment close to the air outlet grilles because they become hot during opera- tion. The heated air outlet grilles and bottom plate may cause injury or damage to other equipment. Also, do not put the projector on a desk that is easily affected by heat.

Do not look into the air outlet grilles when projector is operating.

Heat, dust, etc. may blow out of them and hurt your eyes.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector, causing deterioration in the projector quality and fire.

Place of installation

For safety's sake, do not use the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.

Operating temperature: between +41˚F (+5˚C) and +95˚F (+35˚C)

Operating humidity: between 30% and 90%

Never put any heat-producing device under the projector to prevent the projector from being over- heated.

Do not install the projector at a place that is unstable or subject to vibration.

Do not install the projector near any equipment that produces a strong magnetic field. Also refrain from installing the projector near any cable carrying a large amount of current.

Place the projector on a solid, vibration-free surface. Otherwise it may fall, causing serious injury or dam- age.

Do not stand the projector on its end. It may fall, causing serious injury or damage.

Slanting the projector more than ±10˚ (right and left) or ±15˚ (front and rear) may cause trouble or explo- sion of the lamp.

Do not place the projector near air-conditioning unit or heater to avoid the air outlet and inlet grilles from being exposed to hot air.

ENGLISH

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced Radio / TV technician for help.

Changes or modifications not expressly approved by Mitsubishi could void the user's authority to operate this equip- ment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class B digital apparatus complies with Canadian ICES-003.

EN - 5

Image 5
Contents XD450 XD400 Risk of Electric Shock Do not Open When using the projector in EuropeContents Important safeguards Do not look into the lens when the projector is oper- ating Do not keep using the damaged projectorPlace of installation Never remove the cabinet Do not modify the projectorTerminal board OverviewControl panel Adjustment foot Front Lamp cover Adjustment feet Rear Bottom side Remote controlHow to disable the Laser button How to enable the Laser buttonBattery installation Remote controlOperation range of the remote control Reception angle verticalLayout of the projector InstallationRear projection Front projectionProjector + AV device Basic connectionsProjector + DVD player or Hdtv decoder VCR, etcCOMPUTER/COMPONENT Video DVI-D Hdcp IN-2 Projector + Computer Basic connectionsFor Macintosh About DDCAfter using the projector Adjustment of the projection anglePreparation Preparation for projectionBasic operation Power-onVolume from the speaker Power-offAnamorphic mode Auto Position buttonBasic operation Menu operationOff. Use the remote control to turn on the lamp Projector is in the stand-by mode when the lamp isStand-by mode when there is no signal input from SourceMenu operation Signal User No need to adjust in normal useImage adjustment Image adjustmentColor temperature About color temperatureSimple adjustment method Image adjustmentAdjustment of the image from the computer Expand Advanced featuresPicture in Picture PinP StillSetting of the image displayed during startup or muting Advanced featuresHow to use the installed functions Installation other devices remote commandsHow to install Projector + computer with USB connector Mouse remote controlOperation USBTo enable the password function Password functionTo cancel the password function FunctionInterval of lamp replacement Lamp replacementImages arent projected on the screen TroubleshootingProblem Cause and solution Images arent projected correctly TroubleshootingOthers Cleaning of the projector and the ventilation slotsCleaning of the lens Condition IndicatorsKensington Lock SpecificationsCD-ROM SpecificationsCGA70 Mitsubishi Electric Corporation

XD450U specifications

The Mitsubishi Electronics XD450U projector is a sophisticated device designed to enhance the presentation experience in both education and professional environments. Renowned for its reliability and performance, the XD450U combines a host of advanced features and technologies, making it a valuable tool for educators, corporate trainers, and business professionals.

One of the standout characteristics of the XD450U is its impressive brightness output. With a brightness rating of 4500 ANSI lumens, this projector is capable of delivering sharp and vibrant images even in well-lit rooms. This feature ensures that presentations remain clear, engaging, and easily visible to all audience members.

Resolution is another key aspect of the XD450U's design. The projector boasts a native XGA resolution of 1024 x 768 pixels, allowing it to produce detailed images and text. This resolution is particularly suitable for displaying presentations, documents, and other visual content with precision, ensuring that every detail is captured and effectively conveyed.

The XD450U incorporates advanced DLP (Digital Light Processing) technology, which contributes to its high-quality image production. DLP technology enhances color accuracy and provides smooth video playback, making it an excellent choice for multimedia presentations that include video content. Additionally, the projector offers a dynamic contrast ratio that improves the depth of images, enhancing the viewing experience overall.

Connectivity options are abundant with the XD450U, featuring multiple inputs such as HDMI, VGA, and composite video ports. This flexibility allows users to easily connect a variety of devices, including laptops, DVD players, and document cameras, facilitating seamless presentations. An adaptable design ensures that the projector can be integrated into numerous setups without difficulty.

The XD450U is also designed with user convenience in mind. It features a lightweight and compact design, making it easy to transport and set up in different locations. The projector has an intuitive interface and remote control, allowing for quick adjustments and easy operation during presentations.

In terms of maintenance, the XD450U is equipped with a long-life lamp that can last up to 5,000 hours in standard mode, reducing the frequency of lamp replacements and associated downtime. This enhances the overall cost-efficiency of ownership, making it a practical choice for frequent users.

In summary, the Mitsubishi Electronics XD450U projector combines high brightness, excellent resolution, advanced DLP technology, and versatile connectivity features to provide an exceptional presentation tool. Its user-friendly design and low maintenance requirements further enhance its appeal, making it an ideal choice for various professional and educational settings.