Mitsubishi Electronics XD450U Remote control, Battery installation, Reception angle vertical

Page 8

Remote control

Battery installation

Use two AA size batteries.

1.Remove the back cover of the remote control by pushing the battery compartment door in the direction of the ar- row.

2.Load the batteries making sure that they are positioned correctly (+ to +, and - to -).

• Load the batteries from - spring side, and make sure to set them tightly.

3.Replace the back cover.

Caution:

•Use of a battery of wrong type may cause explosion.

•Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries should be used.

•Dispose of used batteries according to your local regulations.

•Batteries may explode if misused. Do not recharge, disassemble, or dispose of in fire.

•Be sure to handle the battery according to the instructions.

•Load the battery with its positive (+) and negative (-) sides correctly oriented as indicated on the remote control.

•Keep batteries out of reach of children and pets.

•Remove the battery, if the remote control is not used for a long time.

•Do not combine a new battery with an old one.

•If the solution of batteries comes in contact with your skin or clothes, rinse with water. If the solution comes in con- tact with your eyes, rinse them with water and then consult your doctor.

Operation range (of the remote control)

The maximum operation distance of the remote control is about 10 m (or about 32 feet) when the remote control is pointed at the remote control sensor of the projector. When the remote control is pointed to the screen, the distance from the remote control to the projector via the screen should be 5 m or less. However, the operation distance varies depending on the type of the screen used.

Reception angle (vertical)

 

20°

20°

 

 

10°

10°

 

Reception angle (horizontal)

 

Reception angle (vertical), ceiling mount

 

 

 

20°

20°

30°

30°

 

 

Important:

•Do not expose the remote control sensor to direct sunlight or fluorescent light. Keep a distance at least 2 m (6.5 feet) between the remote control sensor and the fluorescent light to ensure correct operation of the remote control. Inverted fluorescent light, if located near the projector, may interfere the remote control.

•When you use the remote control too close to the remote control sensor, the remote control may not work correctly.

EN - 8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents XD450 XD400 When using the projector in Europe Risk of Electric Shock Do not OpenContents Important safeguards Do not keep using the damaged projector Do not look into the lens when the projector is oper- atingPlace of installation Never remove the cabinet Do not modify the projectorTerminal board OverviewControl panel Bottom side Remote control Adjustment foot Front Lamp cover Adjustment feet RearHow to disable the Laser button How to enable the Laser buttonRemote control Battery installationOperation range of the remote control Reception angle verticalInstallation Layout of the projectorRear projection Front projectionBasic connections Projector + AV deviceProjector + DVD player or Hdtv decoder VCR, etcCOMPUTER/COMPONENT Video DVI-D Hdcp IN-2 Basic connections Projector + ComputerFor Macintosh About DDCAdjustment of the projection angle After using the projectorPreparation Preparation for projectionPower-on Basic operationPower-off Volume from the speakerAnamorphic mode Auto Position buttonMenu operation Basic operationProjector is in the stand-by mode when the lamp is Off. Use the remote control to turn on the lampStand-by mode when there is no signal input from SourceSignal User No need to adjust in normal use Menu operationImage adjustment Image adjustmentColor temperature About color temperatureSimple adjustment method Image adjustmentAdjustment of the image from the computer Advanced features ExpandPicture in Picture PinP StillAdvanced features Setting of the image displayed during startup or mutingHow to use the installed functions Installation other devices remote commandsHow to install Mouse remote control Projector + computer with USB connectorOperation USBPassword function To enable the password functionTo cancel the password function FunctionLamp replacement Interval of lamp replacementImages arent projected on the screen TroubleshootingProblem Cause and solution Troubleshooting Images arent projected correctlyOthers Cleaning of the projector and the ventilation slotsCleaning of the lens Indicators ConditionSpecifications Kensington LockSpecifications CD-ROMCGA70 Mitsubishi Electric Corporation

XD450U specifications

The Mitsubishi Electronics XD450U projector is a sophisticated device designed to enhance the presentation experience in both education and professional environments. Renowned for its reliability and performance, the XD450U combines a host of advanced features and technologies, making it a valuable tool for educators, corporate trainers, and business professionals.

One of the standout characteristics of the XD450U is its impressive brightness output. With a brightness rating of 4500 ANSI lumens, this projector is capable of delivering sharp and vibrant images even in well-lit rooms. This feature ensures that presentations remain clear, engaging, and easily visible to all audience members.

Resolution is another key aspect of the XD450U's design. The projector boasts a native XGA resolution of 1024 x 768 pixels, allowing it to produce detailed images and text. This resolution is particularly suitable for displaying presentations, documents, and other visual content with precision, ensuring that every detail is captured and effectively conveyed.

The XD450U incorporates advanced DLP (Digital Light Processing) technology, which contributes to its high-quality image production. DLP technology enhances color accuracy and provides smooth video playback, making it an excellent choice for multimedia presentations that include video content. Additionally, the projector offers a dynamic contrast ratio that improves the depth of images, enhancing the viewing experience overall.

Connectivity options are abundant with the XD450U, featuring multiple inputs such as HDMI, VGA, and composite video ports. This flexibility allows users to easily connect a variety of devices, including laptops, DVD players, and document cameras, facilitating seamless presentations. An adaptable design ensures that the projector can be integrated into numerous setups without difficulty.

The XD450U is also designed with user convenience in mind. It features a lightweight and compact design, making it easy to transport and set up in different locations. The projector has an intuitive interface and remote control, allowing for quick adjustments and easy operation during presentations.

In terms of maintenance, the XD450U is equipped with a long-life lamp that can last up to 5,000 hours in standard mode, reducing the frequency of lamp replacements and associated downtime. This enhances the overall cost-efficiency of ownership, making it a practical choice for frequent users.

In summary, the Mitsubishi Electronics XD450U projector combines high brightness, excellent resolution, advanced DLP technology, and versatile connectivity features to provide an exceptional presentation tool. Its user-friendly design and low maintenance requirements further enhance its appeal, making it an ideal choice for various professional and educational settings.
Top Page Image Contents