Mitsubishi Electronics FL7000 Simple method to adjust the image position, LPF Progressive filter

Page 31

Adjusting projected images (continued)

How to adjust the image supplied from the computer using the menu:

Carry out the following procedures according to the symptoms.

Wide strips appear. ……………………………………… Adjust TRACKING in the SIGNAL menu.

The projected image flickers.

 

 

 

The projected image is blurred

Adjust FINE SYNC. in the SIGNAL menu.

The projected image is displaced horizontally

Adjust HORIZ.POSITION in the SIGNAL menu. Every time the

 

W button is pressed, the image moves to the right. Every time

 

the X button is pressed, the image moves to the left.

The projected image is displaced vertically

Adjust VERT.POSITION in the SIGNAL menu. Every time the W

 

button is pressed, the image moves down. Every time the X

 

button is pressed, the image moves up.

The top part of the image flags

Change the setting of HOLD in the SIGNAL menu. Select ON

 

,

 

 

press the ENTER button, and adjust BEGIN or END to minimize

 

the flagging.

A solid black or solid white appears in the image

Adjust CLAMP POSITION or CLAMP WIDTH in the SIGNAL -

 

USER menu.

The motion doesn’t run smoothly

Adjust VERT. SYNC in the SIGNAL - USER menu. Select

 

AUTO for normal use.

Noise appears on the right or left half of the image

Adjust SHUTTER(LS) or SHUTTER(RS) in the SIGNAL - USER

 

menu.

Noise appears on the top or bottom part of the image

Adjust SHUTTER(U) or SHUTTER(L) in the SIGNAL - USER

 

menu.

1.Display the SIGNALmenu.

2.Press the S or T button to select an item to adjust.

3.Adjust the selected item by pressing the W or X button.

To cancel the menu:

4. Press the MENU button.

• Do not change the settings of the SIGNAL menu in normal use.

Simple method to adjust the image position

To adjust the horizontal position:

1.Align the left edge of the image with the left side of the screen by adjusting HORIZ.POSITION. Then, align the right edge of the image with the right side of the screen by adjusting TRACKING.

2.Repeat step 1 above to complete the adjustment of the horizontal position.

To adjust the vertical position:

3. Align the upper edge of the image with the upper side of the screen by adjusting VERT.POSITION.

LPF (Progressive filter)

You can select whether or not to enable the LPF.

Vertical or horizontal streak noise may appear on the projected image, depending on the type of the DVD player or game console you use. In such a case, you can reduce such streak noise by enabling the LPF. However, projected images become softened slightly.

EN-31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents FL7000 Compliance Notice When using the projector in EuropeContents Important safeguards Important safeguards Inserting the batteries into the remote control Checking accessoriesPreparing your projector Overview Preparating your projectorControl area Terminal board How to enable the Laser button Bottom side Remote controlAdjustment feet Air inlet grille/Filter cover Lamp cover How to disable the Laser buttonReception angle Using the remote controlOperational range of the remote control Using the wired remote controlScreen size and projection distance Setting up your projectorSetting up the screen When the aspect ratio of the screen isWhen projected images are distorted to a trapezoid Setting up your projectorAdjusting the projection angle When fine streaks are seen on projected imagesRear projection Front projection, ceiling mountingViewing computer images Connecting the projector to a computerFor audio output connection Plugging the power cordViewing computer images For monitor connectionRemove the lens cap Projecting imagesAV mute When connecting to a notebook computerExample of the setting procedure for external output To stop projectingConnecting to a video player, etc Connecting the projector to video equipmentViewing video images Projector + DVD player or Hdtv decoder Viewing video imagesConnection for video equipment having an Hdmi terminal Connection for video equipment having a DVI-D terminal Plugging in the power cordEN-20 With the Feature menu Volume from the speakerSetting the aspect ratio How to change the settings With the remote controlMenu operation SetupImage menu Image Advanced menu How to set the menusAvailable settings in the menus Menu operationLOW Installation menuAspect Auto Feature menuSignal User menu Signal menuInformation Information menuTo sharpen or soften the projected image Sharpness Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintColor Enhancer Adjusting projected imagesTo adjust the tone of white Color Temp About color temperatureYES How to adjust the computer imageLPF Progressive filter Simple method to adjust the image positionTo adjust the horizontal position To adjust the vertical positionSet the image size Advanced featuresSetting procedure Set the background colorTo enable the password function Advanced featuresPassword function To cancel the password functionTo resume the motion in the image To use the split modeSplit FreezeUp button Mouse remote controlProjector + computer with USB connector OperationAbout PJLink Supervising and controlling by computerProjectorView PJLinkNormal condition IndicatorsProcedure for setting the anti-theft alarm device Terminal cover with anti-theft alarm deviceProcedure for changing batteries Replacing the lamp Interval of lamp replacementReplacing the lamp Reset of the lamp operation timeTo replace the lamp Cleaning of the lens MaintenanceCleaning of the air-filter Cleaning of the projector and the ventilation slotsNo image appears on the screen TroubleshootingNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution Kensington Lock Others Problem SolutionSpecifications Replacement part option/not included in the boxXGA85 SpecificationsWithout terminal cover With terminal cover ConnectorsDimension drawings unit mm Real modeMitsubishi Projector Contact Information

FL7000 specifications

Mitsubishi Electronics has once again showcased its commitment to innovation with the launch of the FL7000 series, a cutting-edge display technology aimed at enhancing visual experiences across various sectors including retail, corporate, and entertainment. The FL7000 series is engineered to deliver stunning image quality, versatility, and advanced features that facilitate seamless integration and usability.

One of the standout characteristics of the FL7000 series is its impressive resolution. With 4K Ultra HD capabilities, it provides crystal-clear images with rich detail, making it an ideal choice for presentations, advertisements, and visual displays. The high brightness levels ensure that images remain vibrant even in well-lit environments, which is crucial for retail and public spaces.

The FL7000 series includes advanced image processing technologies that enhance color accuracy and contrast. With a wide color gamut, it can reproduce a broader spectrum of colors, allowing images to appear more lifelike. The incorporation of HDR (High Dynamic Range) technology further elevates the viewing experience by providing deeper blacks and brighter whites, which is essential for dynamic visual content.

Flexibility and ease of use are other key features of the FL7000 series. The displays are designed for easy installation and integration into existing setups, whether as part of a corporate conference room, a digital signage solution, or a creative installation. The modular design allows for configurations that can adapt to various space constraints and customer needs.

Mitsubishi also emphasizes connectivity in the FL7000 series. The displays come equipped with multiple input options, including HDMI, DisplayPort, and USB interfaces, enabling compatibility with a wide range of media sources. This versatility empowers users to easily switch between different content, making it suitable for dynamic environments.

Additionally, the FL7000 series features an intuitive user interface that simplifies operation and management. Users can configure settings, schedule content, and even manage multiple displays through an integrated software solution, streamlining workflows and enhancing productivity.

In conclusion, the Mitsubishi Electronics FL7000 series sets a new benchmark for display technology, combining high-resolution imaging, advanced processing capabilities, and flexible installation options. Whether used for business, educational purposes, or retail applications, the FL7000 series is poised to transform the way visual information is presented and consumed. With its robust features and technological advancements, it represents a significant advancement in the realm of display solutions.
Top Page Image Contents