Mitsubishi Electronics FL7000 Maintenance, Cleaning of the air-filter, Cleaning of the lens

Page 41

Maintenance

Warning:

•Never use flammable air duster or other materials when cleaning the air-filter. Flammable substances may ignite causing fire or backdown when the lamp is illuminated.

•Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols when cleaning the projector body and lens. Flammable substances may ignite causing fire or breakdown while the lamp is illuminating.

Caution:

Be sure to turn off the lamp and unplug the power cord from the wall outlet before you perform any maintenance on the projector.

Cleaning of the air-filter

Clean the air-filter frequently (about once a month). If the filter or ventilation grilles become clogged with dirt or dust, the tempera- ture inside the projector may rise and cause troubles, such as damage to the inside parts and shortening the life of the panels.

•When the temperature inside the projector rises, the STATUS indicator will blink orange and the lamp will be turned off.

1.

To remove the filter cover, slide the cover in the direction of the

 

 

arrow.

Filter cover

2.

Remove the air-filter from the filter cover.

 

3.

Wash the air-filter or change it with a new filter.

 

 

• Use water or diluted mild detergent to clean the filter. Rinse

 

 

the filter thoroughly and let it dry completely.

 

4.

Attach the air-filter to the filter cover.

 

5.Attach the filter cover to the projector.

•Make sure that the air-filter is attached correctly without displacement.

Important:

•If the filter is damaged or becomes extremely dirty, change it with a new filter. Contact your dealer for a new filter.

•Use the dedicated filter only.

•The power will not turn on if the filter cover is improperly installed.

Filter cover

Air-filter

Caution:

Be sure to use the projector with an air-filter. If not, dust may get inside the projector causing fire and failure.

Cleaning of the projector and the ventilation slots

Use a soft cloth to clean the projector and the ventilation grilles. When the grilles become dirty, wipe them with a soft cloth dampened with diluted mild detergent, and then wipe them with a dry cloth.

• Clean the inside of the terminal cover frequently as dust is apt to be collected.

To protect the surface of the projector from fading or deteriorating:

•Do not spray insecticide on or inside the projector.

•Do not use benzine or thinner to clean it.

•Do not let rubber or plastic materials contact with projector.

Cleaning of the lens

Use a standard lens-cleaning brush or a piece of lens tissue dampened with lens cleaning fluid. The lens surface is fragile. Use only recommended, nonabrasive lens-cleaning materials. Do not touch the lens with your fingers.

EN-41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents FL7000 Compliance Notice When using the projector in EuropeContents Important safeguards Important safeguards Preparing your projector Checking accessoriesInserting the batteries into the remote control Control area Terminal board Preparating your projectorOverview Adjustment feet Air inlet grille/Filter cover Lamp cover Bottom side Remote controlHow to disable the Laser button How to enable the Laser buttonOperational range of the remote control Using the remote controlUsing the wired remote control Reception angleSetting up the screen Setting up your projectorWhen the aspect ratio of the screen is Screen size and projection distanceAdjusting the projection angle Setting up your projectorWhen fine streaks are seen on projected images When projected images are distorted to a trapezoidRear projection Front projection, ceiling mountingViewing computer images Connecting the projector to a computerViewing computer images Plugging the power cordFor monitor connection For audio output connectionRemove the lens cap Projecting imagesExample of the setting procedure for external output When connecting to a notebook computerTo stop projecting AV muteViewing video images Connecting the projector to video equipmentConnecting to a video player, etc Connection for video equipment having an Hdmi terminal Viewing video imagesProjector + DVD player or Hdtv decoder Connection for video equipment having a DVI-D terminal Plugging in the power cordEN-20 Setting the aspect ratio Volume from the speakerHow to change the settings With the remote control With the Feature menuMenu operation SetupAvailable settings in the menus How to set the menusMenu operation Image menu Image Advanced menuLOW Installation menuAspect Auto Feature menuSignal User menu Signal menuInformation Information menuTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To sharpen or soften the projected image SharpnessTo adjust the tone of white Color Temp Adjusting projected imagesAbout color temperature Color EnhancerYES How to adjust the computer imageTo adjust the horizontal position Simple method to adjust the image positionTo adjust the vertical position LPF Progressive filterSetting procedure Advanced featuresSet the background color Set the image sizePassword function Advanced featuresTo cancel the password function To enable the password functionSplit To use the split modeFreeze To resume the motion in the imageProjector + computer with USB connector Mouse remote controlOperation Up buttonProjectorView Supervising and controlling by computerPJLink About PJLinkNormal condition IndicatorsProcedure for changing batteries Terminal cover with anti-theft alarm deviceProcedure for setting the anti-theft alarm device Replacing the lamp Interval of lamp replacementTo replace the lamp Reset of the lamp operation timeReplacing the lamp Cleaning of the air-filter MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lensNo image appears on the screen TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingNo image appears on the screen Problem Solution Kensington Lock Others Problem SolutionSpecifications Replacement part option/not included in the boxXGA85 SpecificationsDimension drawings unit mm ConnectorsReal mode Without terminal cover With terminal coverMitsubishi Projector Contact Information

FL7000 specifications

Mitsubishi Electronics has once again showcased its commitment to innovation with the launch of the FL7000 series, a cutting-edge display technology aimed at enhancing visual experiences across various sectors including retail, corporate, and entertainment. The FL7000 series is engineered to deliver stunning image quality, versatility, and advanced features that facilitate seamless integration and usability.

One of the standout characteristics of the FL7000 series is its impressive resolution. With 4K Ultra HD capabilities, it provides crystal-clear images with rich detail, making it an ideal choice for presentations, advertisements, and visual displays. The high brightness levels ensure that images remain vibrant even in well-lit environments, which is crucial for retail and public spaces.

The FL7000 series includes advanced image processing technologies that enhance color accuracy and contrast. With a wide color gamut, it can reproduce a broader spectrum of colors, allowing images to appear more lifelike. The incorporation of HDR (High Dynamic Range) technology further elevates the viewing experience by providing deeper blacks and brighter whites, which is essential for dynamic visual content.

Flexibility and ease of use are other key features of the FL7000 series. The displays are designed for easy installation and integration into existing setups, whether as part of a corporate conference room, a digital signage solution, or a creative installation. The modular design allows for configurations that can adapt to various space constraints and customer needs.

Mitsubishi also emphasizes connectivity in the FL7000 series. The displays come equipped with multiple input options, including HDMI, DisplayPort, and USB interfaces, enabling compatibility with a wide range of media sources. This versatility empowers users to easily switch between different content, making it suitable for dynamic environments.

Additionally, the FL7000 series features an intuitive user interface that simplifies operation and management. Users can configure settings, schedule content, and even manage multiple displays through an integrated software solution, streamlining workflows and enhancing productivity.

In conclusion, the Mitsubishi Electronics FL7000 series sets a new benchmark for display technology, combining high-resolution imaging, advanced processing capabilities, and flexible installation options. Whether used for business, educational purposes, or retail applications, the FL7000 series is poised to transform the way visual information is presented and consumed. With its robust features and technological advancements, it represents a significant advancement in the realm of display solutions.
Top Page Image Contents