Mitsubishi Electronics EN-1 user manual When not using a Dhcp server, EN-7

Page 7

Preparation/SetUp (continued)

When not using a DHCP server

5

Select [Assign a specific IP address] and click Next.

 

6

Enter a fixed IP address (for example, 192.168.0.1)

and click Next.

 

7

Click Assign.

 

8

Click Finish.

 

9

Click the Search button.

•

Check the IP address you set.

 

(Note 2)

When using the error/alert e-mail notification function described later, click the Assign IP button and set the subnet mask and default gateway correctly.

•For the values of the subnet mask and default gateway, contact your network administrator.

EN-7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
LAN Control Utility Contents System requirements Preparation/SetUpPreparation before using the network function Major functionsEN-3 InstallationPreparation/SetUp ConnectionEN-4 How to remove Mitsubishi Projector Control Device InstallerEN-5 Setting the IP address of the projectorEN-6 When using a Dhcp serverEN-7 When not using a Dhcp serverEN-8 Telnet settingSetting the display language of ProjectorView language Setting the password Password SetupEN-9 Setting the PJLink certification PJLink certification Mode Setting the LAN control LAN-Controlled ModeEN-10 EN-11 Save and exitEN-12 Using the ProjectorViewHow to start up ProjectorViewProjectorView main screen ProjectorViewEN-13 Mail notification function ProjectorView Virtual Remote controllerEN-14 EN-15 ProjectorView Initial settingEN-16 Support for the PJLink functionTerms and definitions Support for the PJLink functionEN-17
Related manuals
Manual 17 pages 3.31 Kb