PLUS Vision Data Projector user manual Procedure Up to Projecting to the Screen

Page 13

The Procedure Up to Projecting to the Screen

Perform setup adjustments in the following order.

1 Position the projector

Determine the locations to set up the screen and the projector.

See "Placement Guide" on Page E-14, 15.

2 Connect the video equipment and personal computer

Connect your equipment to the projector.

When making connections with the personal computer's DVI connector or RGB connector, see "Connections with Personal Computers" on Page E-16.

When making connections with the video equipment's video connector or an S-video connector, see "Connections with Composite Signals" on Page E-19.

When making connections with the video equipment's YCbCr connector or YPbPr connector, see "Connections with Component Signals" on Page E-20.

When playing the audio through the built-in speaker of the projector, see "Connections with the AUDIO Jack" on Page E-21.

Monitoring the analog RGB input signal, see "Connections with the RGB OUT Connector" on Page E-22.

3 Connecting the power cable and switching on the power

See "Operating" on Page E-23.

See "Finishing" on Page E-25.

4 When selecting the language of menu displays, etc.

(Only when the power is first switched on following purchase)

See "When [Menu Language Select] Is Displayed Upon Switching On the Power" on Page E- 24.

5

6

7

8

Switching on the power of the personal computer and video equipment

Properly adjust the projection image to the screen

See "Adjustment of the Projection Screen" on Page E-26.

Selecting input equipment

See "Input Selection" on Page E-28.

Adjust the screen or video image

Adjust the image to the optimum condition as required.

See the Table of Contents for the adjustment items.

About DLP projectors

Though careful attention is paid to providing optimum quality, please note that with DLP type projectors, in rare cases there may be black spots or bright spots among the picture elements.

Note:

*Please purchase a screen.

*A DVI-D cable (order code 28-697), which is available separately, is required for connections with the DVI connector of the personal computer.

*A component cable (order code 28-690), which is available separately, is required to connect a DVD player or other equipment with YCbCr connectors.

*A component cable (order code 28-690), which is available separately, is required to connect high definition (HD) video equipment or other equipment with YPbPr connectors.

E-13

Image 13

Contents U2-1200/U2-817 DOC Compliance Notice PrecautionsPower Supply InstallationCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Carrying case for projector and accessories Checking the Supplied AccessoriesNames of the Main Unit Parts Built-in Security Slot AC in connector E-23Names of the Main Unit Parts Power button E-23,25 Names of the Remote Control PartsVOL button E-32 Volume adjustment display Infrared transmitter E-12Button Battery Replacement Preparing the Remote ControlRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen U2-1200 Screen Size and Projection Distance Placement GuideProjection Distance U2-817 Screen Size and Projection Distance Placement GuideConnections with Personal Computer Personal Computers with a DVI ConnectorDVI-D cable Available as an option. Order code Connecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin ConnectorPersonal computer Manufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo Equipment with Video Connectors Connections with Composite SignalsVideo Equipment with S-VIDEO Connectors Video cable Supplied item Video cable Suppled itemComponent cable Available as an option Order code Connections with Component SignalsGreen Blue Red Cb Cr Pb Pr Green Blue RedAudio cable Supplied item Connections with the Audio JackAudio conversion cable Supplied itemConnections with the RGB OUT Connector Projector operation Press the Power button Switch on the projector powerRemote control operation Press the Power on button OperatingPress the Enter button to set Power Cable Connections and Switching the Power On/OffThis completes the selection of the display language CursorPower indicator changes to flashing amber Unplug the power cableFinishing Adjustment of the Projection Screen Adjustment of the Projection ScreenTurn the zoom ring and adjust the size of the screen Adjust the projection image to the screenRaising the projection image Making Adjustments with the AdjustersFocus ring Lowering the projection imageWhen Auto Source is On Automatic Adjustment of Analog RGBWhen Auto Source is Off General OperationSelection of Aspect Ratio Video SignalsGeneral Operation Lamp Mode Cancelling Video and Audio TemporarilyFreezing a Moving Picture Using the Presentation Timer Adjust the volume Adjustment of the VolumeTo close the display immediately, press the Cancel button KeystoneImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button Enlarge to the desired sizeContent of Adjustments and Settings Using the Quick MenuMenu Operation Method Menu Screen Names and Functions Adjustment BarMenu Operation Method Menu Name Cursor Deep BlueMenu Display Press the Menu button to display the menu Performing Menu OperationsThis condition al- lows selection of the item name Making Adjustments/SettingsWhen a sub menu is displayed, press the Cancel but Selecting Another Menu Name with Remote Control OperationPress the Cancel button again and cancel the cursor Display Ton and close the sub menuImage Menu name Item Name Sub MenuColor ViewVideo Menu name Item Name Sub Menu SetupSVideo Option Language On Screen Background Startup ScreenPicture Picture Adj. Picture AdjustmentBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionPress of the Enter button forces the reset ResetFine Picture PositionGamma ColorColor Temp WhiteSelection contents at the time of YPbPr input Selection contents at the time of YCbCr inputColor Space White BalanceAspect ViewFilter Vertical Flip Power cable has been unpluggedKeystone Save ViewAuto Power Off SetupAuto Source Menu PositionInput Format SetupVideo and SVideo Logo Background Presentation TimerLogo Scaling Logo Position Capture ModeInvalidata Logo Preview Start Logo CaptureLanguage Example of a display when Aspect button is pressedOn Screen BackgroundDisplays the logo Startup ScreenLamp Timer Reset Factory DefaultInfo StatusLamp Timer Resolution / FrequencyInfo Startup Logo Creation Logo Capture SettingsPreparation and Projection of the Image Start Capture → Page E-52 Startup Logo CreationThermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingCleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Optical SpecificationsElectrical MechanicalResolution Frequency Video Digital Analog SignalTable of Supported Frequency Supported frequency295 Cabinet Dimensions230 Unit mm inch