PLUS Vision Data Projector user manual Picture, Brightness / Contrast / Color / Tint / Sharpness

Picture

•Perform this operation while projecting the picture for which the adjustment/setting will be made.

•Select the menu name "Picture".

See "Menu Operation Method" on Page E-35 for information about performing menu operations. The item name display will differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Page E-40.

Brightness / Contrast / Color / Tint / Sharpness

Picture qualities such as brightness and contrast will change depend- ing on the whether the room is bright or dark. Please adjust to suit your preference.

Select the desired item name and then adjust with the SELECT ￿￿ buttons.

Item Name	SELECT  Button	SELECT  Button
Brightness	Darker	Brighter
Contrast	Less contrast	More contrast
Color	Less dense color	Denser color
Tint	More red	More green
Sharpness	Softer image	Sharper image

Note:

* The adjustment values of the adjustable items are stored according to input source. * "Tint" can be adjusted only at the time of NTSC composite/S signal input.

Brightness	0
Contrast	0
Color	0
Tint	0
Sharpness	0
Reset

Picture Adj. / Fine Picture / H Position / V Position

These adjustments are available when analog RGB signals are input. Usually, automatic adjustment is performed at the time of signal selec- tion, but when automatic adjustment is not effective, these adjustments can be performed.

Note

When the image extends beyond the boundaries of the screen or is smaller than the screen, check that the "View" → "Aspect" setting is set to "Auto". See "Aspect" on Page E-46.

Brightness	0
Contrast	0
Picture Adj.	0
Fine Picture	48
H Position	0
V Position	0
Reset

Picture Adj. (Picture Adjustment)

Adjust this when bright and dark vertical bands appear on the screen.

Select the "Picture Adj." item name and adjust with the SELECT ￿￿ buttons so that the vertical bands disappear and brightness becomes uniform across the screen.

E-42