PLUS Vision Data Projector user manual Specifications, Optical, Electrical, Mechanical

Page 65

Specifications

Model

U2-1200/U2-817

Optical

Method of projection :	DLP™ (single chip DMD)
DMD	U2-1200:	0.7 inches	1024768 dots
	U2-817:	0.55 inches	800600 dots
Lamp	200 W ultra-high pressure mercury lamp
Projection lens :	Manual zoom (1.2), manual focus, F = 2.4 to 2.6, f = 26.5 to 31.8 mm
Image size	U2-1200:Minimum 27 inches (projection distance: 1.2 meters, tele mode)
		Maximum 300 inches (projection distance: 11.5 meters, wide mode)
	U2-817:	Minimum 21 inches (projection distance: 1.2 meters, tele mode)
		Maximum 300 inches (projection distance: 14.8 meters, wide mode)
Light Output	U2-1200:	2000 ANSI lumens
	U2-817:	1500 ANSI lumens
Contrast Ratio	1500:1 (Full on/off)

Electrical

Inputs	Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM)
	RGB (Horizontal :15 to 85 kHz, Vertical 50 to 120 Hz)
Output	VGA (640480), S-VGA (800600), XGA (1024768) *
Color Reproduction	Full color (16,770,000 colors)
Resolution	U2-1200:VGA (640480) expansion/true, S-VGA (800600) expansion/true
	XGA (1024768) true, S-XGA (12801024) compression
	U2-817:VGA (640480) expansion/true, S-VGA (800600) true
	XGA (1024768) compression
Input Current	2.8 A
Power Requirement	100 - 240 V AC, 50/60 Hz
Power Consumption	280 watts

Mechanical

Dimensions Excluding Stand	230 mm (W)58 mm (H)295 mm (D)
	9.0 in.(W)2.3 in.(H)11.6 in.(D)
Weight	Approximately 2.5 kg / 5.5 lbs
Operational Temperatures	Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity
Regulations	UL Approved (UL 1950, CSA 950)
	Meets FCC Class A requirements
	Meets EMC Directive (EN55022, EN55024)
	Meets Low Voltage Directive (EN60950)

• Specifications and design are subject to change without notice.

* XGA can be supported for up to the horizontal synch range 68.7kHz and the vertical synch range 85Hz.

E-65

Image 65

Contents U2-1200/U2-817 DOC Compliance Notice PrecautionsPower Supply InstallationCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Carrying case for projector and accessories Checking the Supplied AccessoriesNames of the Main Unit Parts Names of the Main Unit Parts AC in connector E-23Built-in Security Slot Power button E-23,25 Names of the Remote Control PartsVOL button E-32 Volume adjustment display Infrared transmitter E-12Button Battery Replacement Preparing the Remote ControlRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Projection Distance Placement GuideU2-1200 Screen Size and Projection Distance U2-817 Screen Size and Projection Distance Placement GuideDVI-D cable Available as an option. Order code Personal Computers with a DVI ConnectorConnections with Personal Computer Personal computer Personal Computers with a Mini D-Sub 15-Pin ConnectorConnecting Personal Computers and Video Equipment Manufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo Equipment with Video Connectors Connections with Composite SignalsVideo Equipment with S-VIDEO Connectors Video cable Supplied item Video cable Suppled itemComponent cable Available as an option Order code Connections with Component SignalsGreen Blue Red Cb Cr Pb Pr Green Blue RedAudio cable Supplied item Connections with the Audio JackAudio conversion cable Supplied itemConnections with the RGB OUT Connector Projector operation Press the Power button Switch on the projector powerRemote control operation Press the Power on button OperatingPress the Enter button to set Power Cable Connections and Switching the Power On/OffThis completes the selection of the display language CursorFinishing Unplug the power cablePower indicator changes to flashing amber Adjustment of the Projection Screen Adjustment of the Projection ScreenTurn the zoom ring and adjust the size of the screen Adjust the projection image to the screenRaising the projection image Making Adjustments with the AdjustersFocus ring Lowering the projection imageWhen Auto Source is On Automatic Adjustment of Analog RGBWhen Auto Source is Off General OperationGeneral Operation Video SignalsSelection of Aspect Ratio Freezing a Moving Picture Cancelling Video and Audio TemporarilyLamp Mode Using the Presentation Timer Adjust the volume Adjustment of the VolumeTo close the display immediately, press the Cancel button KeystoneImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button Enlarge to the desired sizeContent of Adjustments and Settings Using the Quick MenuMenu Operation Method Menu Screen Names and Functions Adjustment BarMenu Operation Method Menu Name Cursor Deep BlueMenu Display Press the Menu button to display the menu Performing Menu OperationsThis condition al- lows selection of the item name Making Adjustments/SettingsWhen a sub menu is displayed, press the Cancel but Selecting Another Menu Name with Remote Control OperationPress the Cancel button again and cancel the cursor Display Ton and close the sub menuImage Menu name Item Name Sub MenuColor ViewVideo Menu name Item Name Sub Menu SetupSVideo Option Language On Screen Background Startup ScreenPicture Picture Adj. Picture AdjustmentBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionPress of the Enter button forces the reset ResetFine Picture PositionGamma ColorColor Temp WhiteSelection contents at the time of YPbPr input Selection contents at the time of YCbCr inputColor Space White BalanceFilter ViewAspect Vertical Flip Power cable has been unpluggedKeystone Save ViewAuto Power Off SetupAuto Source Menu PositionVideo and SVideo SetupInput Format Logo Scaling Presentation TimerLogo Background Invalidata Logo Capture ModeLogo Position Preview Start Logo CaptureLanguage Example of a display when Aspect button is pressedOn Screen BackgroundDisplays the logo Startup ScreenLamp Timer Reset Factory DefaultInfo StatusInfo Resolution / FrequencyLamp Timer Preparation and Projection of the Image Logo Capture SettingsStartup Logo Creation Start Capture → Page E-52 Startup Logo CreationThermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingCleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the lamp cover Reset the Lamp TimerMount the new lamp cartridge Optical SpecificationsElectrical MechanicalResolution Frequency Video Digital Analog SignalTable of Supported Frequency Supported frequency230 Unit mm inch Cabinet Dimensions295