PLUS Vision Data Projector user manual Info, Status, Factory Default, Lamp Timer Reset

Info.

•Select menu name "Info.".

See "Menu Operation Method" on Page E-35 for information about performing menu operations. The item name display will differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Page E-41.

Status

This displays information about the equipment.

Select item name “Status” and press the ENTER button. There is a change to the status display.

Press the CANCEL button to return to the menu.

Display Contents:

Projector model, firmware version, and the internet home page ad- dress of PLUS Vision Corp.

Status

Factory Default

Lamp Timer Reset

Lamp Timer 1h

U2 Series

Version : 1 . 0 . 0 . 0 . 0

www.plus-vision.com

Factory Default

This function returns the adjustments and settings of all the in- put sources to the standard factory default values.

Select item name “Factory Default” and press the ENTER button. There is a change to the display [Press "ENTER" to Factory Default Set].

Press the ENTER button to initialize.

To cancel, press the CANCEL button and there will be a return to the menu.

Items that are not set to the factory default:

Projection method, Language and Lamp Timer

Status

Factory Default

Lamp Timer Reset

Lamp Timer	1h
Press “ENTER” to Factory Default Set

Lamp Timer Reset

This function resets the lamp timer. Be sure to perform the reset operation when the lamp cartridge has been replaced.

Select item name “Lamp Timer Reset” and press the ENTER but- ton.

There is a change to the display “Press "ENTER" to Lamp Timer Reset”.

Press the ENTER button to initialize.

To cancel, press the CANCEL button and there will be a return to the menu.

Status

Factory Default

Lamp Timer Reset

Lamp Timer 1h

Press “ENTER” to Lamp Timer Reset

E-55