Onkyo TX-NR1009 Firmware Update, Updating the Firmware via Network, Before you start

Page 85
Firmware Update

Firmware Update

To update the firmware of the AV receiver, you can choose from the following two methods: update via network, or update via USB storage. Choose the one that best suits your environment. Before proceeding with the update, please read the corresponding explanations carefully.

■Update via network

You need a wired Internet connection to update the firmware.

■Update via USB storage (➔ page 86)

Please prepare a USB storage device such as a USB flash memory stick. You need at least 32 MB of available space to update the firmware.

Note

•Check the network connection before updating.

•Do not touch the any cable or device connected to the AV receiver during the update process.

•Do not attempt to access the AV receiver from your PC while it is being updated.

•Do not shutdown the power of the AV receiver while it is being updated.

•The storage media in the USB card reader may not work.

•If the USB device is partitioned, each section will be treated as an independent device.

•If the USB device contains a lot of data, the AV receiver may take a while to read it.

•Operation is not guaranteed for all USB devices, which includes the ability to power them.

•Onkyo takes no responsibility whatsoever for the loss or damage of data resulting from the use of a USB device with the AV receiver. Onkyo recommends that you back up your important music files beforehand.

•If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC adapter to power it.

•USB hubs and USB devices with hub functions are not supported. Do not connect your USB device via a USB hub.

•USB devices with security functions are not supported.

Limitation of liability

The program and accompanying online documentation are furnished to you for use at your own risk. Onkyo will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning your use of the program or the accompanying online documentation, regardless of legal theory, and whether arising in tort or contract. In no event will Onkyo be liable to you or any third party for any special, indirect, incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement or damages on account of the loss of present or prospective profits, loss of data, or for any other reason whatsoever.

See the Onkyo web site for latest information.

Updating the Firmware via Network

The AV receiver allows you to update the firmware using network connection on the rear panel.

Note

•Make sure your AV receiver and TV are turned on and an Ethernet cable is connected to the rear panel of the AV receiver.

•Never unplug or turn off the AV receiver while it is being updated.

•Never plug or unplug an HDMI or Ethernet cable during the update process.

•Do not attempt to access the AV receiver from your PC while it is being updated.

•Never unplug the power cord during the update process.

•It takes maximum 60 minutes to complete the firmware update.

•The AV receiver will retain all your settings after the update is finished.

Before you start

•Set the “HDMI Control(RIHD)” setting to “Off” (➔ page 60).

•Turn off the controller device connected via RS232C and via Ethernet network.

•Turn off Zone 2 and Zone 3.

•Stop playback of contents from Internet Radio, iPod/iPhone, USB or servers, etc.

Update procedure

1

Press RECEIVER followed by SETUP on the

 

remote controller.

 

The Setup menu will be displayed on the TV screen.

 

The procedures thereafter can also be performed on

 

the AV receiver by using its SETUP, arrow and

 

ENTER buttons.

2

Select “Hardware Setup” and press ENTER.

3

Select “Firmware Update” and press ENTER.

 

Note that the “Firmware Update” option will be

 

grayed out for a short while after the AV receiver is

 

turned on. Please wait until it becomes operable.

4

Select “via NET” and press ENTER.

5

Select “Update” and press ENTER.

 

The update process will begin.

 

During the update process, the on-screen display

 

may disappear depending on the updated program.

 

When this occurs, you can still view the update

 

progress on the front display of the AV receiver. The

 

on-screen display will reappear after the update is

 

complete, and upon turning the AV receiver off and

 

on again.

6

The message “Completed!” appears on the front

 

display of the AV receiver, indicating that the

update has been completed.

En

85

Page 84 Page 86
Image 85
Page 84 Page 86
Contents TX-NR1009 ContentsInstruction Manual AV ReceiverImportant Safety Instructions AVISFor U.S. models PrecautionsFor Canadian Models Modèle pour les CanadienFor British models Supplied AccessoriesFor European Models Installing the batteriesIntroduction ContentsConnections Turning On & Basic OperationsAmplifier FeaturesProcessing MiscellaneousTHX Select2 Plus Front & Rear Panels a b cd e Displayf g h m n opabcdef Controlling the AV Receiver Remote Controllerd d e a fl g e h bnConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Screw-typespeaker terminalsSpeaker Connection Precautions Speaker ConfigurationAttaching the Speaker Cable Labels Using a Powered Subwoofer Using Dipole SpeakersBi-ampingthe Front Speakers Connecting a Power Amplifier About AV Connections Connecting AV componentsAV Cables and Jacks Audio Return Channel ARC function Connecting Components with HDMIA B C Connecting Your ComponentsHow to record a video source Connecting a Recording Component Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting the Antennas2 Plug the power cord into an AC wall outlet North American modelsTurning On Turning On/Off the AV ReceiverTurning Off Playback Controlling Contents of USB or Network DevicesPlaying the Connected Component Operating with the remote controllerPlaying an iPod/iPhone via USB Understanding Icons on the DisplayjMENU kRETURNListening to Internet Radio Playing a USB DeviceExtended Mode Music control Extended Mode Video controlRegistering My Favorites*1 Listening to Other Internet RadioENTER Top menu of Internet RadioWindows Media Player 12 Setup Windows Media Player 11 SetupPlaying Music Files on a Server Remote PlaybackUsing the Tuner Using Remote PlaybackTuning into Radio Stations Listening to AM/FM RadioUsing RDS excluding North American models Presetting AM/FM StationsTuning into stations by frequency Deleting PresetsFinding Stations by Type PTY Displaying Radio Text RTENTER Listening to Traffic News TPUsing the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure First measurement positionENTER 3 When you’ve finished making the settings, pressENTER Changing the Speaker Setup Manually Error MessagesUsing a Powered Subwoofer `CancelSelecting Listening Modes Using the Listening ModesPURE AUDIO button and indicator Listening Mode ButtonsNM B b V J K L About Listening ModesExplanatory Notes pageListening Modes Onkyo-OriginalDSP Listening ModesListening Mode Listening Mode • Dolby Pro Logic II/IIx*3 Movie + THX Cinema Using the Sleep Timer Using the Home MenuSetting the Display Brightness Input*1Displaying Source Information Using the Whole House ModeChanging the Input Display 1 Press TV/CD, GAME or VCR/DVRSelecting Speaker Layout Using HeadphonesMuting the AV Receiver 9.1 ch playbackRestoring Default Using Easy MacrosRecording Turning Off the ComponentsOn-screenSetup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory NotesMonitor Out Input/Output AssignChanging the “Monitor Out” setting manually ResolutionComponent Video Input HDMI InputBD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, PORTSpeaker Settings Speaker SetupDigital Audio Input Analog Audio InputSubwoofer Phase Speaker ConfigurationSubwoofer FrontLevel Calibration Speaker DistanceWireless Subwoofer UnitTHX Audio Setup Equalizer SettingsPreserve THX Settings EqualizerMultiplex/Mono Audio AdjustDolby DimensionAudyssey DSX Theater-DimensionalLFE Level Dolby VolumeAudyssey Source SetupDynamic Volume page AudysseyA/V Sync IntelliVolumeName Edit IntelliVolumeTo correct a character Picture AdjustWide Mode*1*2 Picture Mode*1Game Mode*3*4*5 Resolution*3*5Film Mode*3*5*6 Edge Enhancement*3*5*6Saturation*1*3*5 Audio SelectorColor Temperature*3*5 Gamma*3*5Charge Mode Listening Mode PresetFixed Mode Charge ModeVolume Setup Hardware SetupOSD Setup MiscellaneousTuner Multi ZoneHDMI Zone 2 Maximum Volume, Zone 3 Maximum VolumeAudio TV Out Auto StandbyAudio Return Channel Lip SyncNetwork Firmware UpdateMAC Address DHCPLock Setup Remote Controller SetupUsing the Audio Settings Remote Mode SetupSpeaker Levels Dolby VolumeLate Night Dolby VolumeScreen Centered Dialog Music OptimizerRe-EQ Music OptimizerMaking Multi Zone Connections Multi Zone12V Trigger Out Controlling Zone 2/3 ComponentsOperating on the remote controller Operating on the AV receiverAdjusting the Tone and Balance of Zone Adjusting the Volume for ZonesMuting Zones Operating on the remote controllerUsing a Multiroom Kit with a Cabinet Using a Multiroom Kit with ZoneUsing a Multiroom Kit with Other Components iPod/iPhone Playback via Onkyo Dock Using the Onkyo DockUP-A1Dock Auto Power OnRI Dock Controlling Your iPod/iPhoneAuto Power On Other Remote Controllersd el 2 3 4 5 6 Looking up for Remote Control CodePreprogrammed Remote Control Codes pageEntering Remote Control Codes Resetting the Remote Controller Resetting REMOTE MODE ButtonsControlling Other Components Controlling a TVPage Deleting Acquired Commands Learning CommandsMaking Macros Using Normal MacrosRunning Macros Deleting MacrosPower TroubleshootingAudio Can’t turn on the AV receiverThe speaker volume cannot be set as required There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundVideo Remote ControllerTuner The remote controller doesn’t workRecording UP-A1Dock for iPod/iPhoneZone 2/3 Can’t control other componentsUSB Device Playback Music Server and Internet RadioOthers Can’t access the server or Internet radioCOMPONENT VIDEO MONITOR OUT Important Note Regarding Video PlaybackUpdate procedure Firmware UpdateUpdating the Firmware via Network Before you startUpdating the Firmware via USB TroubleshootingUpdate procedure Errors during an update via networkErrors during an update via USB TroubleshootingVideo Connection Formats Connection Tips and Video Signal Path“Monitor Out” set to “HDMI Main” or “HDMI Sub” HDMI OUT MAIN and HDMI OUT SUB of the AVAudio Connection Formats NTSC/PAL Video Resolution ChartOutput About p-compatiblecomponents Using an RIHD-compatibleTV, Player, or RecorderOperations that can be performed with pconnection Players/Recorders1 Confirm the connecting and setting How to connect and setup3 Confirm the settings 4 Operate with the remote controllerSupported Audio Formats About HDMIAbout Copyright Protection Connecting to the Network Network/USB FeaturesNetwork Requirements Internet Access for Internet radioUSB Device Requirements Server RequirementsServer playback Remote playbackAbout DLNA Supported Audio File FormatsMP3 .mp3 or .MP3 WMA .wma or .WMAAmplifier Section SpecificationsTuner Section Video SectionOthers Audio OutputsMemo Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY 2 9 4 0 0 7
Top Page Image Contents