Onkyo TX-NR1009 Specifications, Amplifier Section, Tuner Section, Video Section, General, Hdmi

Page 97
Specifications

Specifications

Amplifier Section

 

Tuner Section

Rated Output Power

All channels: (North American)

135 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC)

160 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.1% (FTC)

145 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)

(Others)

9 ch × 180 W at 6 ohms, 1 kHz, 1 ch driven of 1 % (IEC)

Maximum Effective Output Power

(Asian)

9 ch × 230 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

Dynamic Power*

*IEC60268-Short-term maximum output power

 

300 W (3 , Front)

 

250 W (4 , Front)

 

150 W (8 , Front)

THD+N (Total Harmonic Distortion+Noise)

 

0.08% (20 Hz - 20 kHz, half power)

Damping Factor

60 (Front, 1 kHz, 8 )

Input Sensitivity and Impedance (Unbalance)

200 mV/47 k(LINE)

2.5 mV/47 k(PHONO MM)

Rated RCA Output Level and Impedance

200 mV/470 (PRE OUT)

Maximum RCA Output Level and Impedance 4.6 V/470 (PRE OUT)

Phono Overload 70 mV (MM 1 kHz 0.5%)

Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Direct mode)

Tone Control Characteristics

 

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

110 dB (LINE, IHF-A)

 

80 dB (PHONO MM, IHF-A)

Speaker Impedance

4 or 6 - 16

Video Section

Input Sensitivity/Output Level and Impedance

1Vp-p/75 (Component and S-Video Y) 0.7 Vp-p/75 (Component PB/CB, PR/CR) 0.25 Vp-p/75 (S-Video C)

1Vp-p/75 (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, -3 dB

FM Tuning Frequency Range

(North American)

87.5MHz - 107.9 MHz

(Others)

87.5MHz - 108.0 MHz, RDS

AM Tuning Frequency Range

 

522/530 kHz - 1611/1710 kHz

Preset Channel

40

General

 

 

 

Power Supply

(North American)

 

AC 120 V, 60 Hz

 

(Others)

 

AC 220 - 240 V, 50/60 Hz

Power Consumption

(North American) 8.8 A

 

(Others) 830 W

No-sound Power Consumption

120 W

Stand-by Power Consumption

(North American)

0.2W

(Others)

0.3W

Dimensions (W × H × D)

 

435 mm × 198.5 mm × 435.5 mm

 

17-1/8" × 7-13/16" × 17-1/8"

Weight

18.5 kg (40.8 lbs.)

HDMI

 

Input

IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7,

 

AUX INPUT

Output

OUT MAIN, OUT SUB

Video Resolution

1080p

Audio Format

Dolby TrueHD, DTS-HD Master Audio,

 

DVD-Audio, DSD

Supported

3D, Audio Return Channel, DeepColor,

 

x.v.Color, LipSync, CEC (RIHD)

Video Inputs

Component

IN 1, IN 2

S-Video

BD/DVD, VCR/DVR, CBL/SAT, GAME

Composite

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

AUX

Analog RGB

PC IN

Video Outputs

Component

MONITOR OUT

S-Video

MONITOR OUT, VCR/DVR OUT

Composite

MONITOR OUT, VCR/DVR OUT

Audio Inputs

 

Digital

Optical: 2 (Rear), 1(Front)

 

Coaxial: 3

Analog

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

PC, TV/CD, PHONO, AUX

Multichannel Inputs

7.1

En

97

Image 97
Contents TX-NR1009 ContentsInstruction Manual AV ReceiverImportant Safety Instructions AVISFor U.S. models PrecautionsFor Canadian Models Modèle pour les CanadienFor British models Supplied AccessoriesFor European Models Installing the batteriesIntroduction ContentsConnections Turning On & Basic OperationsAmplifier FeaturesProcessing MiscellaneousTHX Select2 Plus Front & Rear Panels a b cd e Displayf g h m n opabcdef Controlling the AV Receiver Remote Controllerd d e a fl g e h bnConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Screw-typespeaker terminalsSpeaker Connection Precautions Speaker ConfigurationAttaching the Speaker Cable Labels Using a Powered Subwoofer Using Dipole SpeakersBi-ampingthe Front Speakers Connecting a Power Amplifier About AV Connections Connecting AV componentsAV Cables and Jacks Audio Return Channel ARC function Connecting Components with HDMIA B C Connecting Your ComponentsHow to record a video source Connecting a Recording Component Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting the Antennas2 Plug the power cord into an AC wall outlet North American modelsTurning On Turning On/Off the AV ReceiverTurning Off Playback Controlling Contents of USB or Network DevicesPlaying the Connected Component Operating with the remote controllerPlaying an iPod/iPhone via USB Understanding Icons on the DisplayjMENU kRETURNListening to Internet Radio Playing a USB DeviceExtended Mode Music control Extended Mode Video controlRegistering My Favorites*1 Listening to Other Internet RadioENTER Top menu of Internet RadioWindows Media Player 12 Setup Windows Media Player 11 SetupPlaying Music Files on a Server Remote PlaybackUsing the Tuner Using Remote PlaybackTuning into Radio Stations Listening to AM/FM RadioUsing RDS excluding North American models Presetting AM/FM StationsTuning into stations by frequency Deleting PresetsFinding Stations by Type PTY Displaying Radio Text RTENTER Listening to Traffic News TPUsing the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure First measurement positionENTER 3 When you’ve finished making the settings, pressENTER Changing the Speaker Setup Manually Error MessagesUsing a Powered Subwoofer `CancelSelecting Listening Modes Using the Listening ModesPURE AUDIO button and indicator Listening Mode ButtonsNM B b V J K L About Listening ModesExplanatory Notes pageListening Modes Onkyo-OriginalDSP Listening ModesListening Mode Listening Mode • Dolby Pro Logic II/IIx*3 Movie + THX Cinema Using the Sleep Timer Using the Home MenuSetting the Display Brightness Input*1Displaying Source Information Using the Whole House ModeChanging the Input Display 1 Press TV/CD, GAME or VCR/DVRSelecting Speaker Layout Using HeadphonesMuting the AV Receiver 9.1 ch playbackRestoring Default Using Easy MacrosRecording Turning Off the ComponentsOn-screenSetup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory NotesMonitor Out Input/Output AssignChanging the “Monitor Out” setting manually ResolutionComponent Video Input HDMI InputBD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, PORTSpeaker Settings Speaker SetupDigital Audio Input Analog Audio InputSubwoofer Phase Speaker ConfigurationSubwoofer FrontLevel Calibration Speaker DistanceWireless Subwoofer UnitTHX Audio Setup Equalizer SettingsPreserve THX Settings EqualizerMultiplex/Mono Audio AdjustDolby DimensionAudyssey DSX Theater-DimensionalLFE Level Dolby VolumeAudyssey Source SetupDynamic Volume page AudysseyA/V Sync IntelliVolumeName Edit IntelliVolumeTo correct a character Picture AdjustWide Mode*1*2 Picture Mode*1Game Mode*3*4*5 Resolution*3*5Film Mode*3*5*6 Edge Enhancement*3*5*6Saturation*1*3*5 Audio SelectorColor Temperature*3*5 Gamma*3*5Charge Mode Listening Mode PresetFixed Mode Charge ModeVolume Setup Hardware SetupOSD Setup MiscellaneousTuner Multi ZoneHDMI Zone 2 Maximum Volume, Zone 3 Maximum VolumeAudio TV Out Auto StandbyAudio Return Channel Lip SyncNetwork Firmware UpdateMAC Address DHCPLock Setup Remote Controller SetupUsing the Audio Settings Remote Mode SetupSpeaker Levels Dolby VolumeLate Night Dolby VolumeScreen Centered Dialog Music OptimizerRe-EQ Music OptimizerMaking Multi Zone Connections Multi Zone12V Trigger Out Controlling Zone 2/3 ComponentsOperating on the remote controller Operating on the AV receiverAdjusting the Tone and Balance of Zone Adjusting the Volume for ZonesMuting Zones Operating on the remote controllerUsing a Multiroom Kit with a Cabinet Using a Multiroom Kit with ZoneUsing a Multiroom Kit with Other Components iPod/iPhone Playback via Onkyo Dock Using the Onkyo DockUP-A1Dock Auto Power OnRI Dock Controlling Your iPod/iPhoneAuto Power On Other Remote Controllersd el 2 3 4 5 6 Looking up for Remote Control CodePreprogrammed Remote Control Codes pageEntering Remote Control Codes Resetting the Remote Controller Resetting REMOTE MODE ButtonsControlling Other Components Controlling a TVPage Deleting Acquired Commands Learning CommandsMaking Macros Using Normal MacrosRunning Macros Deleting MacrosPower TroubleshootingAudio Can’t turn on the AV receiverThe speaker volume cannot be set as required There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundVideo Remote ControllerTuner The remote controller doesn’t workRecording UP-A1Dock for iPod/iPhoneZone 2/3 Can’t control other componentsUSB Device Playback Music Server and Internet RadioOthers Can’t access the server or Internet radioCOMPONENT VIDEO MONITOR OUT Important Note Regarding Video PlaybackUpdate procedure Firmware UpdateUpdating the Firmware via Network Before you startUpdating the Firmware via USB TroubleshootingUpdate procedure Errors during an update via networkErrors during an update via USB TroubleshootingVideo Connection Formats Connection Tips and Video Signal Path“Monitor Out” set to “HDMI Main” or “HDMI Sub” HDMI OUT MAIN and HDMI OUT SUB of the AVAudio Connection Formats NTSC/PAL Video Resolution ChartOutput About p-compatiblecomponents Using an RIHD-compatibleTV, Player, or RecorderOperations that can be performed with pconnection Players/Recorders1 Confirm the connecting and setting How to connect and setup3 Confirm the settings 4 Operate with the remote controllerSupported Audio Formats About HDMIAbout Copyright Protection Connecting to the Network Network/USB FeaturesNetwork Requirements Internet Access for Internet radioUSB Device Requirements Server RequirementsServer playback Remote playbackAbout DLNA Supported Audio File FormatsMP3 .mp3 or .MP3 WMA .wma or .WMAAmplifier Section SpecificationsTuner Section Video SectionOthers Audio OutputsMemo Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY 2 9 4 0 0 7