Planar PE1900 manual

Page 20

Note: As you choose an item, your screen immediately updates to reflect this setting.

Selecting ‘Black Level Adjust’ activates the “Back Level Adjust” submenu. Adjust its setting by using the ‘Up ()’ and ‘Down ()’ buttons.

If ‘RGB Adjust’ is selected, the “RGB Adjust” submenu is activated. Use the ‘Up ()’ or ‘Down ()’ buttons to choose and highlight one of the three options (Red, Green and Blue) and then use ‘Select’ button to select it. This will activate the corresponding bar on menu, and is adjusted using the ‘Up ()’ and ‘Down ()’ buttons. This control may be helpful in achieving a more natural appearance in graphic images and closer color matching between the printer and the display.

Select ‘Exit’ to exit the “Color” submenu and return to the “Main Menu”.

18

Image 20
Contents PE1900 Page Contents Introduction FeaturesFor Your Safety Page Locations and Functions of Controls InstallationUnpacking the Display Making the Connections Button Function DescriptionPage Using Your Display Turning the Display On and OffTilting the Display Setting the Video ModeSetting the Refresh Rate Minimizing Power Consumption Caring for and Cleaning the DisplayPlug in the display Turn on your PC and display Displaying the OSD Main Menu Adjusting Your DisplaySummary of Control Buttons Selecting Items in the OSD Menu Adjusting the OSD MenuAuto Setup Adjusting the Management Submenu Page Page Adjusting the Clock/Phase Submenu Adjusting the Color Submenu Page Adjusting the OSD Display submenu Adjusting the Factory Recall Selecting your preferred Language Exit and Clear the OSD MenuUsing the Direct Keys BrightnessPage Troubleshooting Message Signal Out Of Range appears on my displayMessage Check Cable appears on my display Message No Sync appears on my displayImage is very unstable Technical Information Display InformationVideo Modes Unknown Video ModesRegulatory Information FCC Statement FCC Notice PartPage Planar SYSTEMS, INC