Planar PE1900 manual Making the Connections, Button Function Description

The functions of the three control buttons which are located at the lower left side of the front panel of your display are described as below:

Button			Function Description
Select	(1) Turn on OSD menu while it is off.
	(2) Execute the function selected in the OSD menu.
	(3) Hold down for 3 sec will clear OSD menu
Up (△)	(1) Move	item	selection	upward	or	increase
	user-adjustable value.(in Main Menu)
	(2) Activate Brightness Menu (Direct-key function).
Down (▽)	(1) Move	item	selection	downward	or	reduce
	user-adjustable value (in Main Menu)
	(2) Auto Setup (Direct-key function).

Making the Connections

Before connecting any cables, make sure that the computer and display are turned off.

To connect the power and video signal cables:

1.Locate the AC power adapter with attached power cable.

2.Connect the power cable to the power jack on the back of the display (as shown below).

3.Plug the two-prong power cord into a power outlet, and plug the other end into the AC power adapter.

5