Introduction, Features, For Your Safety

Introduction

The PE1900 LCD monitor has a 19-inch active matrix TFT (thin film transistor) liquid crystal display module. It is designed for use with any Windows®-based PC.

Features

ÖAutomatic configuration to the PC video settings with maximum SXGA resolution.

ÖThree control buttons plus OSD (on-screen display) for monitor settings adjustment and configuration with ease and instant feedback.

ÖSupport analog video input for direct and immediate replacement of CRT displays.

ÖA tilt feature to optimize viewing position.

ÖFlicker-free performance across all recommended video modes.

ÖSupport for high refresh rates up to 75 Hz.

ÖVESA DDC2B Plug-and-Display compliant.

ÖA Power-saving feature that is compatible with Microsoft® Windows

For Your Safety

Warning

To completely disconnect power from your display, you must remove the power cord from the wall outlet and then remove the power cable from the display.

For your safety and the protection of your monitor, follow these precautions:

ÖUse only the factory-supplied power cord that shipped with your monitor.

ÖTo prevent electrical shock, do not disassemble the display. The cover should be removed only by qualified service personnel.

ÖDo not cover the air vents.

ÖTo avoid the risk of damage to the display and electrical shock to yourself, do not expose the display to rain or moisture.