Planar PE1900 manual Technical Information, Display Information

Page 28

Technical Information

This chapter contains technical information about your LCD Monitor.

Display Information

LCD Module

Display Size

Viewing Angle

Left / Right

Up / Down

Display Colors

Power Input

Maximum/ Standby power consumption

Signal Input Video Signal Sync signals

Line (horizontal) frequency

Raster (vertical) frequency

Pixel dot clock

19-in, active matrix TFT, anti-glare coating, 0.294 mm pixel pitch.

14.8 (H) x 11.9 (V) inches.

-85° / 85°(Typical). -85° / 85°(Typical).

16.7 million.

100~ 240 Vac, 1.2A. Full Range, 50/60 Hz (External AC adapter). < 35 / 3. Watts

RGB positive 0.7VPP, 75ohm.

Separate & Composite, TTL Level.

31.5 kHz ~ 80 kHz.

56 Hz ~ 75 Hz.

135 MHz (maximum).

Recommended mode 1280 x 1024 @ 60 Hz.

Pedestal tilt

Dimensions (W x H x D)

Weight

Operating Conditions Temperature

Humidity

Storage Conditions

Temperature

Humidity

Altitude

-5° forward, 20° backward.

without stand17.4(W) x 2.2 (D) x 15.4 (H) inches.

with stand17.4(W) x 7.9 (D) x 16.4 (H) inches.

14.1 pounds

5° ~ 40°C at altitude 0 ~ 6500 feet

5° ~ 30°C at altitude 6500 ~ 10000 feet 20% ~ 85% RH, non-condensing

-20° ~ 60°C

5% ~ 95% RH

33000 feet Max.

26

Image 28
Contents PE1900 Page Contents For Your Safety FeaturesIntroduction Page Unpacking the Display InstallationLocations and Functions of Controls Making the Connections Button Function DescriptionPage Using Your Display Turning the Display On and OffSetting the Refresh Rate Setting the Video ModeTilting the Display Minimizing Power Consumption Caring for and Cleaning the DisplayPlug in the display Turn on your PC and display Summary of Control Buttons Adjusting Your DisplayDisplaying the OSD Main Menu Auto Setup Adjusting the OSD MenuSelecting Items in the OSD Menu Adjusting the Management Submenu Page Page Adjusting the Clock/Phase Submenu Adjusting the Color Submenu Page Adjusting the OSD Display submenu Adjusting the Factory Recall Selecting your preferred Language Exit and Clear the OSD MenuUsing the Direct Keys BrightnessPage Troubleshooting Message Signal Out Of Range appears on my displayMessage Check Cable appears on my display Message No Sync appears on my displayImage is very unstable Technical Information Display InformationVideo Modes Unknown Video ModesRegulatory Information FCC Statement FCC Notice PartPage Planar SYSTEMS, INC