Planar PE1900 manual Adjusting the OSD Display submenu

Page 21

Adjusting the “OSD Display” submenu

Follow the steps below to adjust the OSD Horizontal and Vertical positions:

1.Activate the OSD “Main Menu”.

2.Use ‘Up ()’ (or ‘Down ()’) to move forward (or backward) to the OSD display icon and highlight it.

3.Use ‘Select’ button to enter the “OSD Display” submenu. This activates two items for further adjustment.

If ‘H. Position’ is selected, use the ‘Up ()’ or ‘Down ()’ buttons to adjust the setting of Horizontal position of the OSD display. The graphic bar and numerical value at the right corner responds accordingly.

If ‘V. Position’ is selected, use the ‘Up ()’ or ‘Down ()’ buttons to adjust the setting of V. position of the OSD display. The graphic bar and numerical value at the right corner responds accordingly.

19

Image 21
Contents PE1900 Page Contents Features For Your SafetyIntroduction Page Installation Unpacking the DisplayLocations and Functions of Controls Button Function Description Making the ConnectionsPage Turning the Display On and Off Using Your DisplaySetting the Video Mode Setting the Refresh RateTilting the Display Caring for and Cleaning the Display Minimizing Power ConsumptionPlug in the display Turn on your PC and display Adjusting Your Display Summary of Control ButtonsDisplaying the OSD Main Menu Adjusting the OSD Menu Auto SetupSelecting Items in the OSD Menu Adjusting the Management Submenu Page Page Adjusting the Clock/Phase Submenu Adjusting the Color Submenu Page Adjusting the OSD Display submenu Adjusting the Factory Recall Exit and Clear the OSD Menu Selecting your preferred LanguageBrightness Using the Direct KeysPage Message Signal Out Of Range appears on my display TroubleshootingMessage Check Cable appears on my display Message No Sync appears on my displayImage is very unstable Display Information Technical InformationUnknown Video Modes Video ModesFCC Statement FCC Notice Part Regulatory InformationPage Planar SYSTEMS, INC