Planar PE1500 manual Selecting Items in the OSD Menu, Description

Item	Description
Auto Setup	Doing the “Auto Setup” function. See “Doing Auto Setup” on page 10.
Management	Open the “Management” submenu where you can select Brightness,
	Contrast or the image position for further adjustment. See “Doing
	Adjustment in the “Management” Submenu on page 11.
	Open the “Clock/Phase” submenu where you can select Clock or Phase for
Clock/Phase	further adjustment. See “Doing Adjustment in the “Clock/Phase”
	Submenu” on page 13.
Color	Open the “Color” submenu where you can select Color Temperature, RGB
	and Black Level for further adjustment. See “Doing Adjustment in the
	“Color” Submenu on page 14.
OSD Display	Open the “OSD Display” submenu where you can select H. position or V.
	position of the OSD display for further adjustment. See “Doing Adjustment
	in the “OSD Display” Submenu on page 16.
Factory Recall	Recall factory-setting values back. See “Doing Factory Recall” on page 17.
Language	Open the “Language” submenu where you can select one of the five
	languages for your preference in display OSD messages. See “Selecting
	Language for Your Preference” on page 18.
Exit	Clear and exit the OSD main menu.

Selecting Items in the OSD Menu

To select items in the OSD “Main Menu＂, you will use the ｀Up(△)＇ or ｀Down(▽)＇ buttons on the front panel of the display.

To select items in the OSD submenus, you will use all three control buttons. To select a specific submenu, you shall use ｀Up(△)＇ or ｀Down(▽)＇ buttons to move forward or backward to the item to be adjusted, and then select it by press ｀Select＇ button.

9