Planar PE1500 manual Doing Adjustment in the OSD Menu, Doing Auto Setup

Page 12

Doing Adjustment in the OSD Menu

Doing Auto Setup

To doing the Auto Setup function you should follow the steps below:

1.Bring-up the OSD “Main Menu”.

2.The ‘Auto’ icon should be highlighted already.

3.Use ‘Select’ button to select and execute the Auto Setup function. After the execution of the Auto Setup function, it will show-up the follow message:

If the image looks correct, choose Yes.

OR

If the image requires further adjustment, choose No, it will shown up ｀Phase＇ bar for your further adjustment by manual. Then you can adjust phase by ｀Up(△)＇ or ｀Down(▽)＇ buttons. When all text appears well focused and there is no instability in the image, press the ‘Select’ key to end up the adjustment.

10

Image 12

Contents PE1500 Contents Features For Your SafetyIntroduction Page Installation Unpacking the DisplayLocations and Functions of Controls Making the Connections Button Function Description SelectUsing Your Display Turning the Display On and OffSetting the Video Mode Setting the Refresh RateTilting the Display Minimizing Power Consumption Caring for and Cleaning the DisplayAdjusting Your Display Summary of Control ButtonsDisplaying the OSD Main Menu Selecting Items in the OSD Menu DescriptionDoing Adjustment in the OSD Menu Doing Auto SetupDoing adjustment in the Management Submenu Contrast Doing adjustment in the Clock/Phase Submenu Doing adjustment in the Color Submenu Page Doing Adjustment in the OSD submenu Doing Factory Recall Selecting Language for Your Preference Using the Direct Keys Auto Setup by Direct KeyTo execute Auto Setup by direct key Exit and Clear the OSD MenuBrightness by Direct Key Troubleshooting Message Check Cable appears on my displayTechnical Information Display InformationVideo Modes Unknown Video ModesRegulatory Information Agency ApprovalsFCC Statement FCC Notice Part Planar Systems, Inc