Planar PE1500 manual Technical Information, Display Information

Page 24

Technical Information

This chapter contains technical information about your LCD Monitor.

Display Information

LCD Module

15-in, active matrix TFT, anti-glare coating, 0.297 mm pixel pitch

Display Size

304.1 mm x 228.1 mm

Viewing Angle

 

Left/Right

-70° / 70°

Up/Down

-65° / 60°

Display Colors

262144

Power Input

100 ~ 240 VAC Full Range, 50/60 Hz (External AC adapter)

Power consumption

Operation Mode : 30W max

Off Mode : 2W max

 

Signal Input

 

Video Signal

RGB positive 0.7VPP, 75ohm

Sync signals

Separate & Composite, TTL Level

Line (horizontal)

31.5 kHz ~ 60 kHz

frequency

 

Raster (vertical)

56 Hz ~ 75 Hz

frequency

 

Pixel dot clock

80 MHz (maximum)

Recommended mode

1024 x 768 @ 60 Hz

Pedestal tilt

20° forward, 5°backward

Dimensions

341mm x 317mm x 140mm

(W x H x D)

341mm x 338mm x68mm (pedestal fold)

Net Weight

3.0 kg

Gross Weight

4.5 kg

Operating Conditions

 

Temperature

5° ~ 40°C at altitude 0 ~ 2000m

 

5° ~ 30°C at altitude 2000 ~ 3000m

Humidity

20% ~ 85% RH, non-condensing

Altitude

3000m Max.

Storage Conditions

 

Temperature

-20°~ 60°C

Humidity

5% ~ 95% RH

Altitude

10000m Max.

22

Image 24
Contents PE1500 Contents Features For Your SafetyIntroduction Page Installation Unpacking the DisplayLocations and Functions of Controls Making the Connections Button Function Description SelectUsing Your Display Turning the Display On and OffSetting the Video Mode Setting the Refresh RateTilting the Display Minimizing Power Consumption Caring for and Cleaning the DisplayAdjusting Your Display Summary of Control ButtonsDisplaying the OSD Main Menu Selecting Items in the OSD Menu DescriptionDoing Adjustment in the OSD Menu Doing Auto SetupDoing adjustment in the Management Submenu Contrast Doing adjustment in the Clock/Phase Submenu Doing adjustment in the Color Submenu Page Doing Adjustment in the OSD submenu Doing Factory Recall Selecting Language for Your Preference Using the Direct Keys Auto Setup by Direct KeyTo execute Auto Setup by direct key Exit and Clear the OSD MenuBrightness by Direct Key Troubleshooting Message Check Cable appears on my displayTechnical Information Display InformationVideo Modes Unknown Video ModesRegulatory Information Agency ApprovalsFCC Statement FCC Notice Part Planar Systems, Inc