Planar PE1500 manual Doing adjustment in the Color Submenu

Page 16

Note:We recommend you do Auto Setup first. And adjusting the clock setting only if the image looks incorrect.

If ｀Phase＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the setting of phase. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly.

Note:We recommend you do Auto Setup and to see whether the phase needs to adjust or not.

If ‘Exit’ is selected, it will exit the “Clock/Phase” submenu and back to the “Main Menu”.

Doing adjustment in the “Color” Submenu

To do adjustment in the “Color” submenu you should follow the steps below:

1.Bring-up the OSD “Main Menu”.

2.Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the color icon and highlight it.

14

Image 16

Contents PE1500 Contents For Your Safety FeaturesIntroduction Page Unpacking the Display InstallationLocations and Functions of Controls Making the Connections Button Function Description SelectUsing Your Display Turning the Display On and OffSetting the Refresh Rate Setting the Video ModeTilting the Display Minimizing Power Consumption Caring for and Cleaning the DisplaySummary of Control Buttons Adjusting Your DisplayDisplaying the OSD Main Menu Selecting Items in the OSD Menu DescriptionDoing Adjustment in the OSD Menu Doing Auto SetupDoing adjustment in the Management Submenu Contrast Doing adjustment in the Clock/Phase Submenu Doing adjustment in the Color Submenu Page Doing Adjustment in the OSD submenu Doing Factory Recall Selecting Language for Your Preference Using the Direct Keys Auto Setup by Direct KeyTo execute Auto Setup by direct key Exit and Clear the OSD MenuBrightness by Direct Key Troubleshooting Message Check Cable appears on my displayTechnical Information Display InformationVideo Modes Unknown Video ModesAgency Approvals Regulatory InformationFCC Statement FCC Notice Part Planar Systems, Inc