Panasonic BT-LH2550P, BT-LH2550E manual Picture/volume adjusting menu operations, Press , to adjust

How to Use the On Screen Menu (continued)

Picture/volume adjusting menu operations

1.Press [ADJUST] to display the picture/volume adjusting menu.

2.Press [ , ] to select item to adjust. The selected item changes to white.

3. Press [ , ] to adjust.
PHASE	0-60	(30)
CHROMA	0, 10-60 (30)
BRIGHT	0-60	(30)
B.LIGHT [BACKLIGHT]	0-60	(50)
VOLUME	0-60	(0)
( ) : Factory defaults

•Setting [B.LIGHT/CONT.] to CONT. [CONTRAST] in the [SYSTEM CONFIG] menu changes the B.LIGHT indication to CONT. enabling CONTRAST adjustment.

CONT. [CONTRAST] 0-60 (50)

•Adjustments are not possible under the following conditions.

•When “CONTROL” in the “CONTROL” menu is set to “REMOTE,” the key mark appears and adjustments cannot be changed.

• Setting the MONO function to ON ( page 27) disables the [PHASE] and [CHROMA] operations.

•During [RGB-COMP] and [DVI-COMP] input, the [PHASE] and [CHROMA] operations are disabled.

• During HV DELAY ( page 33) operation (and a setting other than OFF is selected), [BRIGHT] operation is disabled.

4.Press [ADJUST] to end adjustments. The display is automatically closed after 10 seconds of inaction.

•The unit loads set values when the power is turned on. Changed values are automatically saved after 10 seconds.

19