Panasonic BT-LH2550E User Data, Saving user data, Loading user data, Setup Save, USER1, Factory

User Data

You can save and load up to five combinations of menu settings and picture/volume adjustments as user data. You can also return settings and adjustments to their factory defaults.

User data include the following settings.

•Menu settings except “SETUP LOAD/SAVE” and “CONTROL/CONTROL” (including button function settings on the monitor front panel)

•Screen adjustments made in the picture/volume adjustments menu

Saving user data Loading user data

1.Press [MENU] to display the MAIN menu.

2.Press [ , ] to select the “SYSTEM CONFIG” menu and press [ENTER].

3.Press [ , ] to select the “SETUP SAVE” sub menu and press [ENTER].

The setting in the sub menu changes to green.

1.Press [MENU] to display the MAIN menu.

2.Press [ , ] to select the “SYSTEM CONFIG” menu and press [ENTER].

3.Press [ , ] to select the “SETUP LOAD” sub menu and press [ENTER].

The setting in the sub menu changes to green.

B.LIGHT/CONT.	BACKLIGHT
BACKLIGHT	--
MENU POSITION	CENTER
STATUS DISPLAY	3SEC OFF
SETUP LOAD	FACTORY
SETUP SAVE		USER1
POWER ON SETUP		LAST
POWER SAVE MODE		OFF
CALIBRATION

B.LIGHT/CONT.	BACKLIGHT
BACKLIGHT	--
MENU POSITION		CENTER
STATUS DISPLAY		3SEC OFF
SETUP LOAD		FACTORY
SETUP SAVE		USER1
POWER ON SETUP		LAST
POWER SAVE MODE		OFF
CALIBRATION

Changes to green

4.Press [ , ] to select a “USER1” to “USER5” file to save the settings to and press [ENTER]. The following screen appears.

Changes to green

4.Press [ , ] to select a “USER1” to “USER5” file to load and press [ENTER].

The following screen appears.

To return to the factory defaults, select “FACTORY.”

5.Select “YES” and press [ENTER]. This saves the user data.

5.Select “YES” and press [ENTER]. This loads the user data.

To return to the previous screen Push [MENU].

20