Panasonic BT-LH2550P, BT-LH2550E manual Main Menu continued, TWO WINDOW function

Main Menu (continued)

■TWO WINDOW function

The “TWO WINDOW” function displays two inputs selected from VIDEO, SDI1/2, YPBPR/RGB or DVI-D in two windows.

Each press of the button ([FUNCTION1] to [FUNCTION5]) (page 32) to which the "TWO WINDOW" function has been assigned changes the display mode.

(In the factory default setting, it is assigned to FUNCTION3.)

Press the FUNCTION button to which the TWO WINDOW function has been assigned.

Main window (normal window)

•Main window: Displays input selected by “INPUT” in a single

window.

Video

Press the button again

Main window Sub-window

Video Video

Press the button again

Main window Sub-window

Still image Video

Press the button again

Sub-window

•Main window: Displays input selected by “INPUT.”

•Sub-window: Displays input selected in the “SUB INPUT SEL.” submenu under the “DISPLAY SETUP” menu.

Change “GAMMA SELECT”, “COLOR SPACE”, “COLOR GAIN R” “G” “B” submenu settings in the “VIDEO CONFIG” menu to enable comparison with the main window (video).

•Main window: Displays input selected by “INPUT” as a still life image.

•Sub-window: Displays input selected in the “SUB INPUT SEL.” submenu under the “DISPLAY SETUP” menu.

Change “GAMMA SELECT”, “COLOR SPACE”, “COLOR GAIN R” “G” “B” submenu settings in the “VIDEO CONFIG” menu to enable comparison with the main window (still image).

•Sub-window: Displays input selected in the “SUB INPUT SEL.” submenu under the “DISPLAY SETUP” menu in a single window.

Video

Press the button again

Note:

•When the main window and sub-window input setting is “YPBPR/RGB” and “RGB-COMP,” the main window and sub-window are displayed in a single window. When the input settings for the main window and sub- window are both “DVI-COMP,” they are also displayed in a single window.

•When the input signals selected in the main and sub-window differ, the color shade, etc. may differ slightly.

•When the input signal terminals of video displayed in the main window and sub-window differ, the still image function does not work.

•The main window is normally displayed on the left side.

•When SDI1 or SDI2 is selected for the main window and sub-window, both windows will show the same screen.

41