Planar PE1500 manual Doing Factory Recall

Page 19

If ｀H. Position＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the setting of H. position of the OSD display. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly.

If ｀V. Position＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the setting of V. position of the OSD display. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly.

If ‘Exit’ is selected, it will exit the “Clock/Phase” submenu and back to the “Main Menu”.

Doing Factory Recall

To recall factory settings back you should follow the steps below:

1.Bring-up the OSD “Main Menu”.

2.Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the factory recall icon and highlight it.

17

Image 19

Contents PE1500 Contents For Your Safety FeaturesIntroduction Page Unpacking the Display InstallationLocations and Functions of Controls Button Function Description Select Making the ConnectionsTurning the Display On and Off Using Your DisplaySetting the Refresh Rate Setting the Video ModeTilting the Display Caring for and Cleaning the Display Minimizing Power ConsumptionSummary of Control Buttons Adjusting Your DisplayDisplaying the OSD Main Menu Description Selecting Items in the OSD MenuDoing Auto Setup Doing Adjustment in the OSD MenuDoing adjustment in the Management Submenu Contrast Doing adjustment in the Clock/Phase Submenu Doing adjustment in the Color Submenu Page Doing Adjustment in the OSD submenu Doing Factory Recall Selecting Language for Your Preference Exit and Clear the OSD Menu Using the Direct KeysAuto Setup by Direct Key To execute Auto Setup by direct keyBrightness by Direct Key Message Check Cable appears on my display TroubleshootingDisplay Information Technical InformationUnknown Video Modes Video ModesAgency Approvals Regulatory InformationFCC Statement FCC Notice Part Planar Systems, Inc