Planar PE1500 manual Doing Adjustment in the OSD submenu

Page 18

If ‘RGB Adjust’ is selected, the same sequence as ‘RGB Adjust’ will be followed.

If ‘Exit’ is selected, it will exit the “Color” submenu and back to the “Main Menu”.

Doing Adjustment in the “OSD” submenu

To adjust OSD H. and V. positions you should follow the steps below:

1.Bring-up the OSD “Main Menu”.

2.Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the OSD display icon and highlight it.

3.Use ‘Select’ button to enter the “OSD Display” submenu. It will show up two items for your further adjustment.

16

Image 18

Contents PE1500 Contents Features For Your SafetyIntroduction Page Installation Unpacking the DisplayLocations and Functions of Controls Making the Connections Button Function Description SelectUsing Your Display Turning the Display On and OffSetting the Video Mode Setting the Refresh RateTilting the Display Minimizing Power Consumption Caring for and Cleaning the DisplayAdjusting Your Display Summary of Control ButtonsDisplaying the OSD Main Menu Selecting Items in the OSD Menu DescriptionDoing Adjustment in the OSD Menu Doing Auto SetupDoing adjustment in the Management Submenu Contrast Doing adjustment in the Clock/Phase Submenu Doing adjustment in the Color Submenu Page Doing Adjustment in the OSD submenu Doing Factory Recall Selecting Language for Your Preference To execute Auto Setup by direct key Using the Direct KeysAuto Setup by Direct Key Exit and Clear the OSD MenuBrightness by Direct Key Troubleshooting Message Check Cable appears on my displayTechnical Information Display InformationVideo Modes Unknown Video ModesRegulatory Information Agency ApprovalsFCC Statement FCC Notice Part Planar Systems, Inc