Pioneer PDA-5003, PDA-5004 manual PICTURE/SCREEN Adjustment, Picture adjustment

PICTURE/SCREEN Adjustment

PICTURE adjustment	4 Press the SET button.
	Pressing the SET button writes the value into the
	memory and returns the display to the step 2 screen.
	5 When the setup is finished, press the MENU
	button to exit the menu screen.
	Note
	Make these adjustments for each input (INPUT1 to INPUT5) and
MENU	signals.
5/∞	[PICTURE] mode adjustment items
	Below are brief descriptions of the options that can be set
	in the [PICTURE] mode.

2/3				MENU	CONTRAST ············· Adjust according to the surrounding
				2/3
						brightness so that the picture can be
SET
				SET		seen clearly.
					BRIGHTNESS ·········· Adjust so that the dark parts of the
				5/∞
						picture can be seen clearly.
					COLOR ···················· Adjust to the desired depth (Setting
Display operating		Remote control unit				to a slightly deep color will create a
panel						natural looking picture).
1 Press the MENU button to display the menu					TINT························· Adjust so that flesh tones look
						normal.
screen.
					SHARPNESS ··········· Normally set to the center position.
MENU				INPUT1		To create a softer picture, set to the
PICTURE SCREEN			SETUP	OPTION		left of center. To create a sharper
CONTRAST		:	0			picture, set to the right of center.
BRIGHTNESS		:	0
					Note
COLOR		:	0
TINT		:	0		Consult the Operating Instructions for your Plasma Display
SHARPNESS		:	0
					regarding PICTURE adjustment when inputting computer signals.
PICTURE RESET
					To reset [PICTURE] mode settings to the default
					If settings have been adjusted excessively or the picture
					on the screen no longer appears natural, it may prove
SET	ENTER		MENU	EXIT	more beneficial to reset the [PICTURE] mode to default
2 Use the 5/∞ buttons to select the adjustment					settings instead of trying to make adjustments under
					already adjusted conditions.
item, then press the SET button.					1 In step 2 in the previous procedure, use the 5/∞
MENU				INPUT1
					buttons to select [PICTURE RESET], then press the
PICTURE	SCREEN		SETUP	OPTION
					SET button.
CONTRAST		:	0
BRIGHTNESS		:	0
COLOR		:	0
TINT		:	0
SHARPNESS		:	0
PICTURE RESET
	ENTER			EXIT		PICTURE RESET
SET			MENU
3 Use the 2/3 buttons to adjust the picture quality						YES		NO
					SET	SET	MENU	EXIT
as desired.

2 Use the 2/3 buttons to select [YES], and press the SET button.

BRIGHTNESS		: 0		All [PICTURE] mode settings are returned to the
				factory set default.
	SET		EXIT

27

English

PICTURE/SCREEN Adjustment

En