Pioneer PDA-5004 Setting the Purecinema mode, Use the 5/∞ buttons to select Purecinema, Menu SET

Other Operations

English

Setting the PURECINEMA mode

Allows even higher fidelity DVD playback of film recordings and other images.

Note

Make settings individually for each input (INPUT1, INPUT3 to

3Use the 5/∞ buttons to select [PURECINEMA].

MENU		INPUT1
PICTURE SCREEN	SETUP	OPTION
AUTO POWER OFF	: DISABLE
COLOR TEMP.	: MIDDLE
DNR	: MIDDLE
MPEG NR	: LOW
CTI	: ON
PURECINEMA	: OFF
COLOR DECODING	: RGB

INPUT5), and for each signal type.

MENU

5/∞

2/3

SET

MENU 2/3

SET

5/∞

CLAMP POSITION	: AUTO
SIGNAL FORMAT	: VGA
SET ENTER	MENU EXIT

4Use the 2/3 buttons to select the desired [PURECINEMA] mode.

P U R E C I N E M A : OFF

SET SET MENU EXIT

The factory default setting is [OFF].

Each time the button is pressed, the screen mode setting changes as shown:

Display operating panel Remote control unit

1Press the MENU button to display the menu

3OFF 2 3 STANDARD 2 3 ADVANCE 2

Other Operations

screen.
MENU				INPUT1
PICTURE	SCREEN		SETUP	OPTION
CONTRAST		:	0
BRIGHTNESS		:	0
COLOR		:	0
TINT		:	0
SHARPNESS		: 0
PICTURE RESET
SET	ENTER		MENU	EXIT

2Use the 2/3 buttons to select [SETUP].

MENU					INPUT1
PICTURE		SCREEN	SETUP		OPTION
	AUTO POWER OFF			: DISABLE
	COLOR TEMP.			: MIDDLE
	DNR			: MIDDLE
	MPEG NR			: LOW
	CTI			: ON
	PURECINEMA			: OFF
	COLOR DECODING			: RGB
	CLAMP POSITION			: AUTO
	SIGNAL FORMAT			: VGA
		CHANGE			EXIT
	SET			MENU

5

6

¶OFF ................ [PURECINEMA] function is disabled.

¶STANDARD .... When playing DVDs and Hi-Vision film images recorded at 24 frames/ sec, the recorded data is automatically detected and adjustments made to allow optimum experience of the original beauty of the film image.

¶ADVANCE ...... When playing DVDs of film images recorded at 24 frames/sec, the recorded video information is automatically detected and signals are converted to 72 Hz for playback, thus recreating the fluid movement of a movie theater screen, and the sense of film’s true visual quality.

Note

The screen modes selectable on INPUT 1 may differ between those available on INPUT3 to INPUT5, depending on the type of signal input. For details, consult “Appendix 3: PURECINEMA signal compatibility table” (page 46).

Press the SET button.

The [PURECINEMA] function is set and the screen returns to that shown in step 4.

When finished with the setting, press the MENU button to return to the normal screen image.

38

En