Alarms

TURN ATOMIC CLOCK ON/OFF

Perform this step if you cannot receive Atomic Clock signals. Press and hold DOWN for 2 seconds. Then, manually set the clock following the “Set Clock” instructions (below).

The signal icon indicates that the Atomic Clock feature is ON. No icon means that it is OFF

SET CLOCK

You only need to do this if you have disabled the Atomic Clock feature (for example, if you are too far from or cannot receive a signal).

1.Press and hold MODE for 2 seconds. The Clock Area will blink.

2.Select the offset hour, 12 / 24 hour format, hour, minute, year, month, day, and language. Press UP or DOWN to change the setting. Press MODE to confirm.

NOTE The language options are (E) English,

(F) French, (D) German, (I) Italian, and (S) Spanish.

SWITCH CLOCK DISPLAY

Press MODE to toggle between Clock with Seconds, Clock with Weekday and Calendar, and Clock with Offset Hour display.

This product has 2 alarms: a SingleAlarm and a Weekday Alarm. The Single Alarm can be set to go off at a specific time for a one-time event (for example, if you are napping on Saturday). The Weekday Alarm will sound at the same time Monday - Friday (but not on weekends).

VIEW ALARM SETTINGS

Press ALARM to display the Alarm settings you wish to view: Weekday W or Single S.

SET ALARM

1.Press ALARM to display the type of Alarm you wish to set: Weekday or Single.

2.Press and hold ALARM for 2 seconds. The Alarm settings will blink.

3.Select the hour and minute. Press UP or DOWN to change settings. Press ALARM to confirm.

RMR613HGA lab test R2

1/17/04, 5:00 PM