Mitsumi electronic WD3300U user manual Viewing computer images, Plugging the power cord, About DDC

Page 14

Viewing computer images (continued)

 

Monitor

1

MONITOR OUT

 

RGB cable

For monitor connection:

1.Connect the RGB cable from the monitor to the MONITOR OUT terminal of the projector.

•No video signal is output from the MONITOR OUT terminal during power standby.

1

AUDIO OUT

To audio input terminals

2

For audio output connection:

1.Connect one end of a commercially available audio cable to the AUDIO OUT terminal of the projector.

2.Connect the other end (white and red) of the audio cable to the audio input terminals (L, R) of the audio equipment.

•When the audio cable is connected to the AUDIO OUT terminal, the speaker output is muted.

Audio cable (option)

About DDC

The COMPUTER/COMPONENT VIDEO IN-1 terminal of this projector complies with the DDC1/2B standard and the COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) terminal complies with the DDC2B standard. When a computer supporting this standard is connected to this terminal, the computer will automatically load the information from this projector and prepare for output of appropriate images.

•When connecting a DDC-supporting computer to the projector, turn on the main power switch of the projector before starting the computer.

B. Plugging the power cord

•In order to ensure the safety in case of trouble with the projector, use an electrical outlet having an earth leakage breaker to supply the power to the projector. If you do not have such outlet, ask your dealer to install it.

1. Plug the attached power cord into the power cord inlet of this projector.

2. Plug the other end of the power cord into a power outlet.

Earthing terminal

1

2

Power cord (example)

•The power cords for use in the U.S. and Europe are included with this projector. Use the appropriate one for your country.

•This projector uses the power plug of 3-pin grounding type. Do not take away the grounding pin from the power

plug. If the power plug doesn’t fit your wall outlet, ask an electrician to change the wall outlet.

•The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power supply using other voltages or frequencies than rated. If you use a power supply using other voltage than rated, prepare an appropriate power cord separately.

•Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.

•Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause fire or electric shock.

•Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.

Caution:

•Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.

•Do not plug in or out the power cord with your hand wet. It may cause electric shock.

EN-14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents WD3300 EN-2 Contents Important safeguards Important safeguards Do not keep using the damaged projectorPreparing your projector Checking accessoriesInserting the batteries into the remote control Overview 1112 Power jack Main power switchPreparating your projector Control areaAbout the laser beam Remote controlBottom side Using the wired remote control Using the remote controlOperational range of the remote control Reception angleWhen the aspect ratio is Full Display at 1280 x 800 pixels Setting up your projectorSetting up the screen Screen size and projection distanceWhen fine streaks are seen on projected images Setting up your projectorAdjusting the position of the projected image When projected images are distorted to a trapezoidFront projection, ceiling mounting Rear projectionConnecting the projector to a computer Viewing computer imagesAbout DDC Plugging the power cordViewing computer images For monitor connectionInstalling the terminal cover Projecting images Remove the lens capTo stop projecting Instant Shut DownExample of the setting procedure for external output When connecting to a notebook computerSetting of the resolution AV muteWith the Quick Menu or Feature menu Setting the aspect ratioHow to change the settings With the remote control When using the BNC connector Connecting the projector to video equipmentConnecting to a video player, etc When a TV tuner or VCR is connectedConnection for video equipment having an Hdmi terminal Viewing video imagesProjector + DVD player or Hdtv decoder Plugging in the power cord Connection for video equipment having a DVI-D terminalEN-23 Volume from the speaker Menus displayed in the Detail Menu mode Menu display mode and menu typeMenus displayed in the Quick Menu mode Menu operationBasic procedure for setting the menus Menu operationSettings of each menu item Quick MenuEN-28 Image menu Advanced MenuEN-30 EN-31 Signal menu UserTo adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the tone of white Color TempColor Enhancer Adjusting projected imagesAbout color temperature How to adjust the computer image YESTo adjust the vertical position Simple method to adjust the image positionTo adjust the horizontal position LPF Progressive filterFreeze Advanced featuresSetting procedure To resume the motion in the imageTo enable the password function Advanced featuresPassword function To cancel the password functionOperation Mouse remote controlProjector + computer with USB connector UP buttonConnection Supervising and controlling by computerMajor functions Abnormal condition IndicatorsNormal condition Interval of lamp replacement Replacing the lampTo replace the lamp Reset of the lamp operation timeReplacing the lamp Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots When removing the lamp from the ceiling-mounted projectorTroubleshooting No image appears on the screen Problem SolutionTroubleshooting Images are not displayed correctly Problem SolutionOthers Problem Solution EN-48 Specifications Replacement part option/not included in the boxSpecifications XGA85Real mode ConnectorsDimension drawings unit mm Without terminal coverMitsubishielectric Corporation

WD3300U specifications

The Mitsumi WD3300U is an advanced electronic device designed to meet the growing demands of modern audio and communication applications. Recognized for its robust construction and versatile functionality, the WD3300U serves as a solution for various electronic interfacing needs.

At the core of the WD3300U is its impressive performance specification. It features a high-speed USB interface, allowing for rapid data transfer rates essential for audio processing and multimedia applications. The device supports USB 2.0 technology, which ensures compatibility with a wide range of existing hardware while providing sufficient bandwidth for optimal operation.

The WD3300U delivers exceptional sound quality, thanks to its integrated high-fidelity audio processing capabilities. It utilizes advanced codecs to enhance audio playback and recording, minimizing distortion and ensuring clear sound reproduction. This feature makes it particularly suitable for professional audio applications, such as recording studios and live audio setups where sound integrity is paramount.

One of the standout characteristics of the Mitsumi WD3300U is its user-friendly design. The device offers plug-and-play functionality, allowing users to easily connect it to compatible systems without the need for complex installation processes. This feature is especially beneficial for professionals who require quick deployment in dynamic environments.

In terms of connectivity, the WD3300U is equipped with multiple input and output options, including standard audio jacks and MIDI connections, catering to a wide variety of devices and ensuring flexibility in setups. Its compact form factor makes it an ideal choice for mobile applications, enabling users to integrate it seamlessly into laptops and portable audio rigs.

The reliability of the Mitsumi WD3300U is further enhanced by its durable construction, designed to withstand the rigors of frequent use. The device is built to endure operational stresses, making it a dependable tool for both casual users and professionals in demanding environments.

Overall, the Mitsumi WD3300U combines cutting-edge technology with practical features, making it a valuable asset for anyone in the audio and communication field. Its blend of performance, ease of use, and durability cements its position as a competitive option in the market for electronic interfacing solutions.
Top Page Image Contents