Mitsumi electronic WD3300U Important safeguards, Do not keep using the damaged projector

Page 5

Important safeguards (continued)

WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the User Manual do not attempt to service this product by yourself. Please contact your dealer when you want to fix, adjust or inspect the projector.

Do not modify this equipment.

It can lead to fire or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged, unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the damaged projector.

Do not face the projector lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface.

Place the projection on a leveled and stable surface only. Please do not place equipment on unstable surfaces.

Do not look into the lens when it is operating.

It may hurt your eyes. Never let children look into the lens when it is on.

Do not touch the air outlet grille and bottom plate, which become hot.

Do not touch them or put other equipment in front of the air outlet grille. The air outlet grille and bottom plate, when heated, may cause injury or damage to other equipment. Also, do not set the projector on the desk which is easily affected by heat.

Do not look into the air outlet grille when projector is operating.

Heat, dust, etc. may blow out of it and hurt your eyes.

Do not insert your fingers in the space between the lens and the cabinet.

The lens may shift causing injury or damage to the projector.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector, causing deterioration in the projector quality and fire.

Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols near the projector.

Flammable substances may ignite causing fire or breakdown because the temperature inside the projector rises very high while the lamp is illuminating.

Do not use the projector with condensation on it.

It can lead to breakdown or other failure.

Place of installation

For safety’s sake, refrain from setting the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.

•Operating temperature: between +41°F (+5°C) and +95°F (+35°C)

•Operating humidity: between 30% and 90%

•Never put any heat-producing device under the projector so that the projector does not overheat.

•Do not attach the projector to a place that is unstable or subjected to vibration.

•Do not install the projector near any equipment that produces a strong magnetic field. Also refrain from installing near the projector any cable carrying a large current.

•Place the projector on a solid, vibration free surface; otherwise it may fall, causing serious injury to a child or adult, and serious damage to the product.

•Do not stand the projector; it may fall, causing serious injury and damage to the projector.

•Slanting the projector more than ±10° (right and left) or ±15° (front and rear) may cause trouble or explosion of the lamp.

•Do not place the projector near air-conditioning unit, heater, or humidifier to avoid hot or moist air to the exhaust and ventilation hole of the projector.

EN-5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents WD3300 EN-2 Contents Important safeguards Do not keep using the damaged projector Important safeguardsPreparing your projector Checking accessoriesInserting the batteries into the remote control Preparating your projector 1112 Power jack Main power switchOverview Control areaAbout the laser beam Remote controlBottom side Operational range of the remote control Using the remote controlUsing the wired remote control Reception angleSetting up the screen Setting up your projectorWhen the aspect ratio is Full Display at 1280 x 800 pixels Screen size and projection distanceAdjusting the position of the projected image Setting up your projectorWhen fine streaks are seen on projected images When projected images are distorted to a trapezoidRear projection Front projection, ceiling mountingViewing computer images Connecting the projector to a computerViewing computer images Plugging the power cordAbout DDC For monitor connectionInstalling the terminal cover Remove the lens cap Projecting imagesInstant Shut Down To stop projectingSetting of the resolution When connecting to a notebook computerExample of the setting procedure for external output AV muteWith the Quick Menu or Feature menu Setting the aspect ratioHow to change the settings With the remote control Connecting to a video player, etc Connecting the projector to video equipmentWhen using the BNC connector When a TV tuner or VCR is connectedConnection for video equipment having an Hdmi terminal Viewing video imagesProjector + DVD player or Hdtv decoder Connection for video equipment having a DVI-D terminal Plugging in the power cordEN-23 Volume from the speaker Menus displayed in the Quick Menu mode Menu display mode and menu typeMenus displayed in the Detail Menu mode Menu operationMenu operation Basic procedure for setting the menusQuick Menu Settings of each menu itemEN-28 Advanced Menu Image menuEN-30 EN-31 User Signal menuTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To adjust the tone of white Color TempColor Enhancer Adjusting projected imagesAbout color temperature YES How to adjust the computer imageTo adjust the horizontal position Simple method to adjust the image positionTo adjust the vertical position LPF Progressive filterSetting procedure Advanced featuresFreeze To resume the motion in the imagePassword function Advanced featuresTo enable the password function To cancel the password functionProjector + computer with USB connector Mouse remote controlOperation UP buttonConnection Supervising and controlling by computerMajor functions Abnormal condition IndicatorsNormal condition Replacing the lamp Interval of lamp replacementTo replace the lamp Reset of the lamp operation timeReplacing the lamp Cleaning of the projector and the ventilation slots MaintenanceCleaning of the lens When removing the lamp from the ceiling-mounted projectorNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution EN-48 Replacement part option/not included in the box SpecificationsXGA85 SpecificationsDimension drawings unit mm ConnectorsReal mode Without terminal coverMitsubishielectric Corporation

WD3300U specifications

The Mitsumi WD3300U is an advanced electronic device designed to meet the growing demands of modern audio and communication applications. Recognized for its robust construction and versatile functionality, the WD3300U serves as a solution for various electronic interfacing needs.

At the core of the WD3300U is its impressive performance specification. It features a high-speed USB interface, allowing for rapid data transfer rates essential for audio processing and multimedia applications. The device supports USB 2.0 technology, which ensures compatibility with a wide range of existing hardware while providing sufficient bandwidth for optimal operation.

The WD3300U delivers exceptional sound quality, thanks to its integrated high-fidelity audio processing capabilities. It utilizes advanced codecs to enhance audio playback and recording, minimizing distortion and ensuring clear sound reproduction. This feature makes it particularly suitable for professional audio applications, such as recording studios and live audio setups where sound integrity is paramount.

One of the standout characteristics of the Mitsumi WD3300U is its user-friendly design. The device offers plug-and-play functionality, allowing users to easily connect it to compatible systems without the need for complex installation processes. This feature is especially beneficial for professionals who require quick deployment in dynamic environments.

In terms of connectivity, the WD3300U is equipped with multiple input and output options, including standard audio jacks and MIDI connections, catering to a wide variety of devices and ensuring flexibility in setups. Its compact form factor makes it an ideal choice for mobile applications, enabling users to integrate it seamlessly into laptops and portable audio rigs.

The reliability of the Mitsumi WD3300U is further enhanced by its durable construction, designed to withstand the rigors of frequent use. The device is built to endure operational stresses, making it a dependable tool for both casual users and professionals in demanding environments.

Overall, the Mitsumi WD3300U combines cutting-edge technology with practical features, making it a valuable asset for anyone in the audio and communication field. Its blend of performance, ease of use, and durability cements its position as a competitive option in the market for electronic interfacing solutions.
Top Page Image Contents