Mitsumi electronic WD3300U Using the remote control, Operational range of the remote control

Page 9

Using the remote control

Operational range of the remote control

Front of projector

Rear of projector

30°

30°

30°

30°

 

 

Operate the remote control within a distance of 10 m (30 feet) from the projector, pointing the light beam at the remote control photo-sensor (front or rear) of the projector.

•Keep the remote control photo-sensor out of direct sunlight or fluorescent lamp light.

•Keep the remote control photo-sensor at least 2 m

(6 feet) away from fluorescent lamps. Otherwise, the remote control may malfunction.

•If there is an inverter-operated fluorescent lamp near the remote control, the remote control operation may become unstable.

•When you use the remote control too close to the remote control sensor, the remote control may not work correctly.

When operating the remote control, keep the distance from the remote control to the projector via the screen within about 5 m (15 feet). The operable range of the remote control, however, depends on the characteristics of the screen.

Reception angle

Vertical directions

20°

10°

Vertical directions (ceiling mount)

20°

10°

20°

20°

Using the wired remote control

Attached remote control for this projector can be used as a wired remote control with remote control cable. Wired remote control is useful for operating in a distance or outside of the operating area.

REMOTE IN

REMOTE IN

REMOTE OUT

•For connection, use the pin-pin cable of ø3.5 stereo type, which is commercially available. However, some cable may not work correctly.

•When REMOTE OUT terminal on this projector is connected to the REMOTE IN terminal on the other projector, the two projectors can be controlled together by using the remote control.

•When the remote control is connected with remote control cable, it does not work as a wireless remote control.

•When using the wired remote control, the laser beam may be darker. It is normal.

EN-9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents WD3300 EN-2 Contents Important safeguards Do not keep using the damaged projector Important safeguardsChecking accessories Inserting the batteries into the remote controlPreparing your projector Preparating your projector 1112 Power jack Main power switchOverview Control areaRemote control Bottom sideAbout the laser beam Operational range of the remote control Using the remote controlUsing the wired remote control Reception angleSetting up the screen Setting up your projectorWhen the aspect ratio is Full Display at 1280 x 800 pixels Screen size and projection distanceAdjusting the position of the projected image Setting up your projectorWhen fine streaks are seen on projected images When projected images are distorted to a trapezoidRear projection Front projection, ceiling mountingViewing computer images Connecting the projector to a computerViewing computer images Plugging the power cordAbout DDC For monitor connectionInstalling the terminal cover Remove the lens cap Projecting imagesInstant Shut Down To stop projectingSetting of the resolution When connecting to a notebook computerExample of the setting procedure for external output AV muteSetting the aspect ratio How to change the settings With the remote controlWith the Quick Menu or Feature menu Connecting to a video player, etc Connecting the projector to video equipmentWhen using the BNC connector When a TV tuner or VCR is connectedViewing video images Projector + DVD player or Hdtv decoderConnection for video equipment having an Hdmi terminal Connection for video equipment having a DVI-D terminal Plugging in the power cordEN-23 Volume from the speaker Menus displayed in the Quick Menu mode Menu display mode and menu typeMenus displayed in the Detail Menu mode Menu operationMenu operation Basic procedure for setting the menusQuick Menu Settings of each menu itemEN-28 Advanced Menu Image menuEN-30 EN-31 User Signal menuTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To adjust the tone of white Color TempAdjusting projected images About color temperatureColor Enhancer YES How to adjust the computer imageTo adjust the horizontal position Simple method to adjust the image positionTo adjust the vertical position LPF Progressive filterSetting procedure Advanced featuresFreeze To resume the motion in the imagePassword function Advanced featuresTo enable the password function To cancel the password functionProjector + computer with USB connector Mouse remote controlOperation UP buttonSupervising and controlling by computer Major functionsConnection Indicators Normal conditionAbnormal condition Replacing the lamp Interval of lamp replacementReset of the lamp operation time Replacing the lampTo replace the lamp Cleaning of the projector and the ventilation slots MaintenanceCleaning of the lens When removing the lamp from the ceiling-mounted projectorNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution EN-48 Replacement part option/not included in the box SpecificationsXGA85 SpecificationsDimension drawings unit mm ConnectorsReal mode Without terminal coverMitsubishielectric Corporation

WD3300U specifications

The Mitsumi WD3300U is an advanced electronic device designed to meet the growing demands of modern audio and communication applications. Recognized for its robust construction and versatile functionality, the WD3300U serves as a solution for various electronic interfacing needs.

At the core of the WD3300U is its impressive performance specification. It features a high-speed USB interface, allowing for rapid data transfer rates essential for audio processing and multimedia applications. The device supports USB 2.0 technology, which ensures compatibility with a wide range of existing hardware while providing sufficient bandwidth for optimal operation.

The WD3300U delivers exceptional sound quality, thanks to its integrated high-fidelity audio processing capabilities. It utilizes advanced codecs to enhance audio playback and recording, minimizing distortion and ensuring clear sound reproduction. This feature makes it particularly suitable for professional audio applications, such as recording studios and live audio setups where sound integrity is paramount.

One of the standout characteristics of the Mitsumi WD3300U is its user-friendly design. The device offers plug-and-play functionality, allowing users to easily connect it to compatible systems without the need for complex installation processes. This feature is especially beneficial for professionals who require quick deployment in dynamic environments.

In terms of connectivity, the WD3300U is equipped with multiple input and output options, including standard audio jacks and MIDI connections, catering to a wide variety of devices and ensuring flexibility in setups. Its compact form factor makes it an ideal choice for mobile applications, enabling users to integrate it seamlessly into laptops and portable audio rigs.

The reliability of the Mitsumi WD3300U is further enhanced by its durable construction, designed to withstand the rigors of frequent use. The device is built to endure operational stresses, making it a dependable tool for both casual users and professionals in demanding environments.

Overall, the Mitsumi WD3300U combines cutting-edge technology with practical features, making it a valuable asset for anyone in the audio and communication field. Its blend of performance, ease of use, and durability cements its position as a competitive option in the market for electronic interfacing solutions.
Top Page Image Contents