Mitsumi electronic WD3300U user manual Advanced features, Freeze, Setting procedure

Page 37

Advanced features

Setting of the image displayed during startup or muting

You can display your desired image as the startup screen (or splash screen). Using the menu, you can also use such image as a background that is displayed while the video is muted or no signal is supplied.

•You can capture the images from the COMPUTER1, COMPUTER2, DVI, and HDMI input sources.

Setting procedure

1.Display your desired image.

2.Display the INSTALLATION menu.

3.Select IMAGE CAPTURE by pressing the or button.

opt.

INSTALLATION

 

 

LAMP MODE

 

STANDARD

 

 

 

 

 

 

 

 

STANDBY MODE

 

STANDARD

 

 

 

 

 

 

 

 

 

AUTO POWER

OFF

 

 

ON

 

 

 

 

 

 

 

 

 

 

AUTO POWER

OFF

 

 

OFF

 

 

 

 

 

 

IMAGE CAPTURE

 

GO

 

 

 

 

 

 

4.Press the ENTER button.

•Image capture starts and the captured image is displayed.

•Once you press the ENTER button, you cannot use other functions until the capturing completes.

•When the resolution of the captured image is lower than 1280 x 800, the image is enlarged to 1280 x 800 when displayed.

•When the resolution of the captured image is higher than 1280 x 800, only the portion within the 1280 x 800 range is captured.

Important:

•Images with complicated patterns may not be captured. In such cases, change the image to be captured.

•Some images can’t be captured correctly because of their signal type. For details, see page 50.

•You can’t change the new startup screen back to the original startup screen. (Even when you select RESET ALL in the FEATURE menu, the factory default screen isn’t available any longer.) When you want to change the startup screen again, capture another image.

•The captured image will be displayed from the next startup. If the captured image isn’t displayed, make sure that the setting of SPLASH SCREEN in the INSTALLATION menu isn’t OFF. (See page 30.)

•To display the captured image while the video is muted, set AV MUTE MODE in the INSTALLATION menu to IMAGE. (See page 30.)

•To display the captured image while no signal is supplied, set BACK COLOR in the INSTALLATION menu to IMAGE. (See page 30.)

•In the mute mode, or when no signal is input, it takes longer time to display the captured image.

•You can’t set IMAGE CAPTURE when PASSWORD

FUNCTION in the FEATURE menu has been set to SPLASH ID SCREEN to enable the password lock.

Freeze

To stop the motion in the image temporarily (or to display a still image):

Press the FREEZE button on the remote control.

•The image will freeze temporarily.

To resume the motion in the image:

Press the FREEZE button on the remote control again.

Important:

•Do not display a still picture for a long time because the afterimages may persist on the screen.

EN-37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents WD3300 EN-2 Contents Important safeguards Do not keep using the damaged projector Important safeguardsInserting the batteries into the remote control Checking accessoriesPreparing your projector Preparating your projector 1112 Power jack Main power switchOverview Control areaBottom side Remote controlAbout the laser beam Operational range of the remote control Using the remote controlUsing the wired remote control Reception angleSetting up the screen Setting up your projectorWhen the aspect ratio is Full Display at 1280 x 800 pixels Screen size and projection distanceAdjusting the position of the projected image Setting up your projectorWhen fine streaks are seen on projected images When projected images are distorted to a trapezoidRear projection Front projection, ceiling mountingViewing computer images Connecting the projector to a computerViewing computer images Plugging the power cordAbout DDC For monitor connectionInstalling the terminal cover Remove the lens cap Projecting imagesInstant Shut Down To stop projectingSetting of the resolution When connecting to a notebook computerExample of the setting procedure for external output AV muteHow to change the settings With the remote control Setting the aspect ratioWith the Quick Menu or Feature menu Connecting to a video player, etc Connecting the projector to video equipmentWhen using the BNC connector When a TV tuner or VCR is connectedProjector + DVD player or Hdtv decoder Viewing video imagesConnection for video equipment having an Hdmi terminal Connection for video equipment having a DVI-D terminal Plugging in the power cordEN-23 Volume from the speaker Menus displayed in the Quick Menu mode Menu display mode and menu typeMenus displayed in the Detail Menu mode Menu operationMenu operation Basic procedure for setting the menusQuick Menu Settings of each menu itemEN-28 Advanced Menu Image menuEN-30 EN-31 User Signal menuTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To adjust the tone of white Color TempAbout color temperature Adjusting projected imagesColor Enhancer YES How to adjust the computer imageTo adjust the horizontal position Simple method to adjust the image positionTo adjust the vertical position LPF Progressive filterSetting procedure Advanced featuresFreeze To resume the motion in the imagePassword function Advanced featuresTo enable the password function To cancel the password functionProjector + computer with USB connector Mouse remote controlOperation UP buttonMajor functions Supervising and controlling by computerConnection Normal condition IndicatorsAbnormal condition Replacing the lamp Interval of lamp replacementReplacing the lamp Reset of the lamp operation timeTo replace the lamp Cleaning of the projector and the ventilation slots MaintenanceCleaning of the lens When removing the lamp from the ceiling-mounted projectorNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution EN-48 Replacement part option/not included in the box SpecificationsXGA85 SpecificationsDimension drawings unit mm ConnectorsReal mode Without terminal coverMitsubishielectric Corporation

WD3300U specifications

The Mitsumi WD3300U is an advanced electronic device designed to meet the growing demands of modern audio and communication applications. Recognized for its robust construction and versatile functionality, the WD3300U serves as a solution for various electronic interfacing needs.

At the core of the WD3300U is its impressive performance specification. It features a high-speed USB interface, allowing for rapid data transfer rates essential for audio processing and multimedia applications. The device supports USB 2.0 technology, which ensures compatibility with a wide range of existing hardware while providing sufficient bandwidth for optimal operation.

The WD3300U delivers exceptional sound quality, thanks to its integrated high-fidelity audio processing capabilities. It utilizes advanced codecs to enhance audio playback and recording, minimizing distortion and ensuring clear sound reproduction. This feature makes it particularly suitable for professional audio applications, such as recording studios and live audio setups where sound integrity is paramount.

One of the standout characteristics of the Mitsumi WD3300U is its user-friendly design. The device offers plug-and-play functionality, allowing users to easily connect it to compatible systems without the need for complex installation processes. This feature is especially beneficial for professionals who require quick deployment in dynamic environments.

In terms of connectivity, the WD3300U is equipped with multiple input and output options, including standard audio jacks and MIDI connections, catering to a wide variety of devices and ensuring flexibility in setups. Its compact form factor makes it an ideal choice for mobile applications, enabling users to integrate it seamlessly into laptops and portable audio rigs.

The reliability of the Mitsumi WD3300U is further enhanced by its durable construction, designed to withstand the rigors of frequent use. The device is built to endure operational stresses, making it a dependable tool for both casual users and professionals in demanding environments.

Overall, the Mitsumi WD3300U combines cutting-edge technology with practical features, making it a valuable asset for anyone in the audio and communication field. Its blend of performance, ease of use, and durability cements its position as a competitive option in the market for electronic interfacing solutions.
Top Page Image Contents