10.Close the expansion card cover and snap it into place
•If the cover won’t close, make sure the CPU card has been inserted all the way into the connector.
Closing the expansion card cover
11.Boot your Mac to test the Card/installation.
•Check that you get a successful boot up “chime”, ensuring that the card is well seated and working.
•Simply plug the power cord and keyboard into the Mac, and start up the Mac. Once you have verified the “chime, you can disconnect power, and complete the card installa- tion. If you do not hear a “chime”, refer to Chapter 5 - Tech Support.
Chapter 2 - Installing the MACh Speed G3 Upg | rade Car d |
Page 18
12. Replace the cover on the computer
Closing the cover
Snapping the cover into place
13.Reconnect all cables.
14.Package the old CPU card for later.
•Put the used card into MACh Speed
15 Reboot your system and work faster than ever before!
• Proceed to Chapter 3 - Installing Softwar | e |
Chapter 2 - Installing the MACh Speed G3 Upg | r ade Car d |
Page 19