InFocus LP290 instruction manual Basic Menu, Contrast, Brightness, Color

Page 28

U s i n g	t h e	P r o j e c t o r

Basic Menu

NOTE: The color setting applies

to video sources only.

FIGURE 14

Basic menu

Contrast

The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.

1Use the up and down arrows to highlight Contrast, press Source/Select, use the left and right arrows to adjust the con- trast from 0 to 100 in the slider bar, then press Source/Select to accept your changes.

Brightness

Adjusting the brightness changes the intensity of the image.

1Use the up and down arrows to highlight Brightness, press Source/Select, use the left and right arrows to adjust the brightness from 0 to 100 in the slider bar, then press Source/ Select to accept your changes.

Color

The color setting adjusts a video image from black and white to fully saturated color.

1Use the up and down arrows to highlight Color, press Source/Select, use the left and right arrows to adjust the color from 0 to 100 in the slider bar, then press Source/Select to accept your changes.

22

Image 28

Contents FCC Warning Canada Safety CertificationsEN 55022 Warning Declaration of Conformity Australian Certification C-tick mark TrademarksTable of Contents Appendix IndexSafety Definitions Safety Symbols Safety InstructionsSafety Terms Customer Service Important Operating ConsiderationsImage Resolution IntroductionLP280 LP290Unpacking the Projector CompatibilityDiately if anything is missing Shipping box contents Rear view of projector Usage Guidelines If You Need AssistanceWarranty Setting UP the Projector F tT t i n g O j e c t o r Connecting a Computer Do you want to play your computer’s audio on the projector?T t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Basic Image Adjustment Using the ProjectorAdjusting the Projector I n g O j e c t o r Using the Remote Control Using the Keypad and Remote Buttons PowerMenu Source/Select keypad only or Computer and Video remote onlyArrow buttons VolumeKeystone Black remote only Effect remote onlyContrast remote only Brightness remote onlyUsing the On-Screen Menus Basic Menu ContrastBrightness ColorReset SetupAbout Setup menu Picture menuSystem menu Language menu Effect menuService menu Userlogo menu Cleaning the Lens Maintenance & TroubleshootingCleaning the Dust Filters I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock Problem The projector is not running TroubleshootingLEDs Problem Only the start-up screen displays Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screenProblem Image is too wide or narrow for screen Problem Image is out of focusProblem Image and menus are reversed left to right Problem Projected image is distortedPage I n t e n a n c e Troubleshooting Specifications AppendixAccessories Standard Accessories Ship with the projector Part NumberOptional Accessories HW-RF-REMLSRPortable and Laptop Activation Chart Key command to Computer Activate port De-activate portFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using Video Mirroring with a PowerBook Computer Using SimulScanProjected Image Size Index NumericsD e Page D e Limited Warranty InFocus-Branded ProductsWarranty Limitation and Exclusion

Related manuals

Manual 62 pages 23.33 Kb