System menu
Turn the features in the System menu on and off by highlighting them and pressing Source/Select. A checkmark in the box indi- cates the feature is on; an empty box means the feature is off.
FIGURE 16
System menu
•Ceiling: This turns the image upside down for
•Rear: This reverses the image so you can project from behind a translucent screen.
•SourceSearch: When this feature is on, the projector automati- cally searches for an active source. When it is off, you must press the Source/Select button on the keypad or the Computer or Video button on the remote to switch among sources.
•Hide OSD: This hides the
•DPMS enable: This turns the Display Power Management Sys- tem (DPMS) on. When it is on, the projector turns the lamp off after 3 minutes of not detecting an active source. The projector will return to normal activity immediately if it detects an active source. After 5 additional minutes, the projector turns com- pletely off. You must press the Power button to turn the projec- tor back on. The LED blinks green when in DPMS mode.
•PnP enable: This turns the plug and play feature on and off. When it is On, most new computers will automatically recog- nize the projector, then set the monitor resolution and refresh rate accordingly. You need to set the Plug and Play setting to Off for the projector to display properly on some older comput- ers.
25