InFocus LP290 Maintenance & Troubleshooting, Cleaning the Lens, Cleaning the Dust Filters

Page 35

MAINTENANCE & TROUBLESHOOTING

This section describes how to:

•clean the lens

•clean the air intake dust filters

•replace the projection lamp

•replace the batteries in the remote

•use the security lock feature

•troubleshoot the projector

Cleaning the Lens

Follow these steps to clean the projection lens:

1Apply a non-abrasive camera lens cleaner to a soft, dry cloth.

•Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to the lens.

•Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.

2Lightly wipe the cleaning cloth over the lens in a circular motion.

3If you don’t intend to use the projector immediately, replace the lens cap.

Cleaning the Dust Filters

The dust filters catch dust and other particles in the air. If the fil- ters become clogged, the projector does not cool properly and may malfunction.

1Turn off the projector and unplug the power cord.

2Turn the projector upside down and remove the screws on the filter doors.

29

Image 35

Contents EN 55022 Warning Safety CertificationsFCC Warning Canada Australian Certification C-tick mark Trademarks Declaration of ConformityTable of Contents Index AppendixSafety Terms Safety InstructionsSafety Definitions Safety Symbols Important Operating Considerations Customer ServiceLP290 Image ResolutionIntroduction LP280Diately if anything is missing CompatibilityUnpacking the Projector Shipping box contents Rear view of projector If You Need Assistance Usage GuidelinesWarranty F t Setting UP the ProjectorT t i n g O j e c t o r Do you want to play your computer’s audio on the projector? Connecting a ComputerT t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Adjusting the Projector Using the ProjectorBasic Image Adjustment I n g O j e c t o r Using the Remote Control Source/Select keypad only or Computer and Video remote only Using the Keypad and Remote ButtonsPower MenuKeystone VolumeArrow buttons Brightness remote only Black remote onlyEffect remote only Contrast remote onlyUsing the On-Screen Menus Color Basic MenuContrast BrightnessAbout SetupReset Picture menu Setup menuSystem menu Effect menu Language menuService menu Userlogo menu Cleaning the Dust Filters Maintenance & TroubleshootingCleaning the Lens I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock LEDs TroubleshootingProblem The projector is not running Problem Image isn’t centered on the screen Problem Only the start-up screen displaysProblem Color or text not being projected Problem The screen resolution is not rightProblem Projected image is distorted Problem Image is too wide or narrow for screenProblem Image is out of focus Problem Image and menus are reversed left to rightPage I n t e n a n c e Troubleshooting Appendix SpecificationsStandard Accessories Ship with the projector Part Number AccessoriesHW-RF-REMLSR Optional AccessoriesKey command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook ComputerProjected Image Size Numerics IndexD e Page D e InFocus-Branded Products Limited WarrantyWarranty Limitation and Exclusion

Related manuals

Manual 62 pages 23.33 Kb