InFocus LP290 instruction manual Important Operating Considerations, Customer Service

Page 6

S a f e t y

I n s t r u c t i o n s

 

 

Caution: Don’t set liquids on the projector. Spilled liquids may damage your projector.

Caution: Don’t place the projector on a hot surface or in direct sunlight.

Caution: Do not drop the projector. Transport the projector in an InFocus-approved case; see page 41 for a list of cases.

Important Operating Considerations

Do not place the projector on a tablecloth or other soft covering that may block the vents. In the unlikely event of the bulb ruptur- ing, thoroughly clean the area in back of the projector and discard any edible items placed in that area.

 

 

)

 

 

m

 

.6

(

 

ft

 

 

2

 

 

Do not place objects in

this area in back of the projector

Customer Service

If you need assistance, call InFocus Customer Service directly at 1-800-799-9911. Support is free between 6 a.m. and 6 p.m. PST, Monday through Friday. Support is available in North America after hours and weekends for a fee at 1-888-592-6800.

Or, send us an e-mail at techsupport@infocus.com.

In Europe, call InFocus in The Netherlands at (31) 35-6474010.

In Asia, call InFocus in Singapore at (65) 353-9449.

iv

Image 6
Contents Safety Certifications FCC Warning CanadaEN 55022 Warning Declaration of Conformity Australian Certification C-tick mark TrademarksTable of Contents Appendix IndexSafety Instructions Safety Definitions Safety SymbolsSafety Terms Customer Service Important Operating ConsiderationsLP280 Image ResolutionIntroduction LP290Compatibility Unpacking the ProjectorDiately if anything is missing Shipping box contents Rear view of projector Usage Guidelines If You Need AssistanceWarranty Setting UP the Projector F tT t i n g O j e c t o r Connecting a Computer Do you want to play your computer’s audio on the projector?T t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Using the Projector Basic Image AdjustmentAdjusting the Projector I n g O j e c t o r Using the Remote Control Menu Using the Keypad and Remote ButtonsPower Source/Select keypad only or Computer and Video remote onlyVolume Arrow buttonsKeystone Contrast remote only Black remote onlyEffect remote only Brightness remote onlyUsing the On-Screen Menus Brightness Basic MenuContrast ColorSetup ResetAbout Setup menu Picture menuSystem menu Language menu Effect menuService menu Userlogo menu Maintenance & Troubleshooting Cleaning the LensCleaning the Dust Filters I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock Troubleshooting Problem The projector is not runningLEDs Problem The screen resolution is not right Problem Only the start-up screen displaysProblem Color or text not being projected Problem Image isn’t centered on the screenProblem Image and menus are reversed left to right Problem Image is too wide or narrow for screenProblem Image is out of focus Problem Projected image is distortedPage I n t e n a n c e Troubleshooting Specifications AppendixAccessories Standard Accessories Ship with the projector Part NumberOptional Accessories HW-RF-REMLSRPortable and Laptop Activation Chart Key command to Computer Activate port De-activate portFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using Video Mirroring with a PowerBook Computer Using SimulScanProjected Image Size Index NumericsD e Page D e Limited Warranty InFocus-Branded ProductsWarranty Limitation and Exclusion
Related manuals
Manual 62 pages 23.33 Kb