Using the Remote Control
To control the computer’s mouse from the projector’s remote or keypad, you must connect one of the Control cables to the com- puter. See page 7 for details.
Turn the remote on using the on/off button on the side of the remote. Point the remote control at the projection screen or at the front of the projector (not at the computer). The range for opti- mum operation is about 16 feet and 60 degrees from the front of the projector (see Figure 10). If you point the remote at the projec- tion screen, the distance to the screen and back to the projector must be less than or equal to 16 feet. For best results, point the remote directly at the projector.
60º
16.4’ (5m)
FIGURE 10
Remote range
13