InFocus LP260 See page 22 for instructions on setting these manually

Page 31

Gamma

Press the point left or right button to obtain better contrast from 0 to 16.

Auto Image menu

Auto image automatically adjusts fine sync, total dots, and image position for most computers. You can turn these automatic adjustments off and set these parameters manually, if desired.

1Select Auto Image in the menu.

The “Auto Adjust Image” menu appears.

auto image menu

2Move the arrow to the desired parameter using the up and down point buttons.

3Press select to turn the automatic adjustments on and off.

Fine sync and Horiz. Size

See page 22 for instructions on setting these manually.

Position

See the following section for instructions on setting this manually.

Press Save to store the on/off settings, press Start to start Auto Image adjustments, and press Quit to exit this menu.

23

Image 31

Contents I D E Page Safety Certifications Declaration of Conformity Table of Contents B l e N t e n t s Safety Instructions F e t y S t r u c t i o n s Unpacking the Projector Image ResolutionIntroduction CompatibilityT r o d u c t i o n Views of the projector Usage Guidelines WarrantyIf You Need Assistance Image Size, Width and Height Setting UP the ProjectorVideo Pb ⁄ Cb Pr ⁄ Cr Reset audio OUT AV Connecting a Computer Connecting a Video Player Powering up the Projector and Adjusting the Image Turning Off the Projector Adjusting the Image Using the ProjectorI n g O j e c t o r Using the Remote Control Remote control Using the Keypad and Remote Buttons Source keypad only or Computer and Video remote only Computer menus Using the On-Screen MenusSystem Menu Computer AdjustmentsPC Adjustment Number of vertical lines Display area Image Menu See page 22 for instructions on setting these manually Position menu Screen menu Video Source menu Video AdjustmentsVideo System menu Component Video Signal Format Normal video image size with 4x3 aspect ratio Color Sharpness Setting menu Display Language menu Cleaning the Lens Maintenance & TroubleshootingCleaning the Fan Intake Filters Replacing the Projection Lamp Removing the lamp cover Replacing the Batteries in the Remote Control Problem Only the start-up screen displays Troubleshooting Problem The projector is not runningProblem Image is too wide or narrow for screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screenProblem Lamp shuts off Problem no soundProblem Image is noisy or streaked Problem Lamp seems to be getting dimmerI n t e n a n c e Troubleshooting Appendix SpecificationsStandard Accessories Ship with the projector Part Number AccessoriesOptional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F8 NCR Zeos Ctrl-Shift-D Using Video Mirroring with a PowerBook Computer P e n d i Hdtv IndexD e Limited Warranty Limitation of Liability